Reverse Displacement Motor (RDM)0 pages
MAKING MODERN LIVING POSSIBLE
Data Sheet
Reverse Displacement Motor (RDM)
Open Circuit Piston Motor
For more than 40 years, Danfoss has been developing
state-of-the-art components and systems for mobile
machinery used in off -highway operations around the world.
We have become a preferred supplier by offering the best of
what really matters: the hardware inside your vehicle
application.
The Reverse Displacement Motor (RDM) is designed for use in
mobile open circuit applications. It offers reverse functionality
without external valves, and provides system robustness with
available anti-cavitation and shock valves. The RDM uses the
existing and proven technology of the Danfoss L/K motor.
These motors have been optimized with regard to options, life,
package size and installed cost.
The RDM is a two-position reversing motor, with smooth,
shift-on-the-go capability. The integrated proportional shifting
valve uses system pressure.
It allows reversing functionality without external valves and
external pressure supply.
Compliant
Features
L1410616 • Rev BA • December 2014
yy Designed for Durability and Flexibility
–– Especially designed for open circuit applications
with a need for reverse functionality
–– Five displacements allow the optimum selection
of a hydraulic motor to fit your application
–– Reliability - uses existing and proven technology
of Danfoss L&K motors
yy Wide Range of Options
–– Fail Safe: Without control signal, the motor is
biased to maximum forward speed
–– Damped shifting from reverse to forward
–– Shaft options with dust seal protector
–– Integrated system protection - anti-cavitation
and shock valve
–– High capacity bearings to withstand axial fan
yy Installation and Packaging benefits
forces
–– Short and compact
–– Complimentary to Danfoss Series 45 open circuit
–– High efficiency - nine piston rotating groups with
pumps with electronic proportional control
an 18 degree maximum angle
–– PLUS+1 micro controller with fan drive software
–– Uses system pressure for shifting – no external
available
pressure supply needed
–– This motor has the capability to be held at or
–– Integrated shifting valve enables reversing – no
near neutral for potential added system power
external valves needed - less hoses - less losses
savings or faster heating of the engine at start-up
- simple and clean installation
–– Variety of porting options allow for easier system
–– 12Vdc and 24Vdc valves
configurations system configurationst
- Metric O-Ring bosst
- SAE O-Ring boss t
- Split flange
–– A speed sensor is available