عضویت 
ورود اعضا
راهنمای خرید
ISH0 pages
MODEL
ISH
SUCTION FILTER WITH INDICATOR
Suction Line
Element allowance E
I Dimensions and Standard Flow Rates
1. Aluminum alloy body with stainless steel wire element, indicator and relief
valve.
2. Horizontal installation type, no need for space above filter body to take out
element.
3. Element is taken out horizontally, no need for space above filter body.
4. Clogging of filter element can be checked by indicator.
5. Built-in relief valve ensures oil flow to pump.
6. U type indicator is provided as standard.
Micro switch and magnet are available under additional options.
7. Indicating pressure difference
Green (start of red): 0.02 MPa
8. Please contact us for use of fluids other than mineral oil on packing,
O-rings and other parts.
Caution
No features for air-bleeding due to filter's design.
Use this filter only in suction line where no air bubble accumulation
occurs.
► Indicator
Code | u |
Model | U4-02 |
U type indicator
(Visual)
Indicating deferential pressure
Red button pops out: 0.02 MPa
• U type Indicator remains Indication
even a pump shut down.
• Push in the red button with a ringer to
reset tfie indicator.
When the red indication appears,
clean the element soon.
Red button
E type indicator
(Electric contact)
Code | E |
Model | E4-02 |
DIN Connector Standard
IEC529 (EN60529) IP65 compatible.
^14
Indicating differential pressure
Switch actuating pressure: 0.02 MPa
• Wire outlet uses DIN connector
and prlca-tube of G(PF)1/2 can also be
installed.
• DIN connector allows wire outlet to be 1.0
set in any direction at intervals of 90
degrees.
Terminal block Is provided In DIN connector.
E type indicator is auto reset.
When warning signal Is Issued,
clean the element.
G1/2
Indicator wiring and terminal No.
02. NO.
NC
74
O-ring and Packing
\PartNo, Modd\ | 12 | O 13 | O 14 | O 15 | O 16 | 18 |
ISH-03A ISH-04A | G30 | P11 | 665 | G35 | t2X 54 65^40 | P18 |
ISH-06A ISH-08A | G45 | G90 | 650 | 12X^85/^55 | ||
ISH-10A ISH-12A | 055 | P14 | G100 | 665 | 12X*10O/i70 | |
ISH-16A | G70 | G125 | 680 | (2X^120/^85 | ||
ISH-20A ISH-24A | G95 | G145 | 6100 | t2X 5*140/^105 |
Part List
"\Symbol Model\. | Inner Dia | L | Li | Lt | H | D | Flange | Bolt d3 | Element Allowance E | Element | Mass (kg) | Standard Flow Rate (fl/mln) | ||||||
d | F | P | T | t | dz | hi | di | |||||||||||
ISH-03A | 10A | 192 | 43 | 123 | 58 | 90 | 18 | 60 | 56 | 12 | 8 | 9 | M8 | 300 | 90 | 65 | 2.9 | 15.4 |
ISH-04A | 15A | 22 | 27 | |||||||||||||||
ISH-06A | 20A | 222 | 48 | 148 | 71 | 112 | 27.5 | 68 | 70 | 12 | 8 | 9 | M8 | 340 | 110 | 85 | 4.0 | 44 |
ISH-08A | 25A | 34.5 | 92 | |||||||||||||||
ISH-10A | 32A | 283 | 57 | 200 | 85 | 138 | 43 | 86 | 14 | 9 | 11 | M10 | 450 | 160 | 100 | 6A | 130 | |
ISH-12A | 40A | 49 | 82 | 150 | ||||||||||||||
ISH-16A | 50A | 319 | 64 | 229 | 100 | 158 | 61.1 | 96 | 102 | 14 | 9 | 14 | M12 | 510 | 160 | 120 | 8.6 | 210 |
ISH-20A | 65A | 370 | 79 | 265 | 113 | 180 | 77 | 122 | 130 | 20 | 14 | 14 | M12 | 580 | 200 | 140 | 133 | 420 |
ISH-24A | 80A | 90 | 475 | |||||||||||||||
1B | O-ring | NBR | 1 | JISB2401.1A |
17 | Indicator | 1 | ||
16 | Packing | NBR | 1 | |
15 | O-ring | NBR | 1 | JISB 2401.1A |
14 | O-ring | NBR | 1 | * |
13 | O-ring | NBR | 1 | |
12 | O-ring | NBR | 2 | JISB 2401.1A |
11 | Cap bolt | SCM | 4 | |
10 | Drain plug | SCM | 1 | |
9 | Bolt | SS | 8 | |
8 | Companion flange | SS400 | 2 | |
7 | Spring | SWPA | 1 | |
6 | Stop ring | SS | 1 | |
5 | Wave washer | SK | 1 | |
4 | Element | 1 | ||
3 | Relief valve | CAC406 | 1 | |
2 | Cover | ADC12 | 1 | |
1 | Body | AC2B | 1 | |
MNo. | Part Name | Material | Qty | Remarks |
SAdd 48 mm to the dimension "L" when E(D)type Indicator Is Installed.
13
► Model Code
Fluid Type
ISH
Code | Fluid |
Blank | Mineral oil |
F | Phosphate ester-based oil |
G | Water glycol-based oil |
Code | Inner Dia. |
03A | 10A |
04A | 15A |
06A | 20A |
08A | 25A |
10A | 32A |
12A | 40A |
16A | 50A |
20A | 65A |
24A | 80A |
Inner Diameter | Filtration Rating | Option |
Code | Filtration | Media |
60W | 60 mesh | Wire (SUS) |
100W | 100 mesh | |
150W | 150 mesh | |
200W | 200 mesh |
Code | Indicator | Model |
U | Visual | U4-02 |
E | Electric | E4-02 |
D | Electric (for micro capacity) | E4-02D |
Code | Magnet |
Blank | None |
M | With |
i Standard
\TypaofLoad | Resistance Load | Inductive Load |
250V AC | 3A | 2A |
30V DC | 3A | 2A |
Coding Example F-ISH-08A-100W-E
► Spares-
Element
Fluid Type
ISH
Inner Diameter | Filtration Rating |
Coding example: P-F-ISH-08A-1OOVV
SP
Sealing parts set
For element replacement (Part No. with
— ISH -
in "O-ring and packing".)
Fluid Type
Inner
Diameter
Coding example: SP-F-ISH-08A
• For overhaul
SA-
Fluid Type
ISH
Inner
Diameter
Coding example: SA-F-ISH-08A
► Flow Rate Chart-
(ISO VG32
•Viscosity: 32cSt(40£)
Filtration Rating 150 Mesh (150W)
03 04 06
08
0.00 1
0.0001
100
Row Rate (fl/min)
000
14
"
