Video Mounting Systems0 pages
VIDEO MOUNTING SYSTEMS
Page 1 of 4
105 MALE C MOUNT ADAPTER
The #105 male C Mount adapter flange
adapts specific #2 or #3 shutter housing
types to user equipment fitted with a C
mount thread (1.00in x 32TPI). This adapter
can be attached to the #2 housing rear
surface (via the 1.625in x 40TPI thread) or
the front surface (via three #2-56 flat head
screws). The LS and VS14/25 series, only,
can be configured with this flange type.
106 FEMALE C MOUNT ADAPTER
The #106 female C mount adapter flange
adapts specific #2 or #3 shutter housing
types to user equipment fitted with a male C
mount thread (1.00in x 32TPI). This adapter
can be attached to the #2 housing rear surface
(via the 1.625in x 40TPI thread) or the
front surface (with the use of a #130 thread
adapter). The LS and VS14/25 series can
be configured with this flange type.
110 MALE T MOUNT ADAPTER
The #110 T Mount Adapter flange adapts
specific #2 or #3 shutter housing types to
user equipment fitted with a T mount thread
(42mm x 0.75mm pitch). This adapter can
be attached to the #2 housing rear surface
(via the 1.625in x 40 TPI thread) or the front
surface (via three #4-40 flat head screws).
The VS14/25 and VS35 series, only, can be
configured with this flange type.
Figure 1
Figure 2
VIDEO MOUNTING SYSTEMS
The UNIBLITZ® shutter line has proven to be a beneficial enhancement to number of video imaging applications.
Due to the growing demand for shutters capable of addressing the needs in this application area, Vincent
Associates has designed mounting systems that can be interfaced with popular video systems. On the following
pages, you will find information on many types of video systems including “F-C”, “C”, and “T” video mounts. The
various mounting selections found on this sheet are available as an option with any of our series #2 or specific #3
cased shutters. When ordering one of these options, please refer to the “PRODUCT OPTIONS” section of the
specific shutter series you are interested in. After reviewing the following data sheet, if you cannot find what is
required for your particular application, please contact our technical representatives for further assistance.
Figure 3