عضویت 
ورود اعضا
راهنمای خرید
LOADING
Remove Tools At The Swing Arm0 pages
نسخه متنی
"
How to remove the Tools at the Swing Arm when it has Alarm
while doing tool change
You get “alarm 9101 ATC not ready Arm home input” – alarm “9102 ATC not ready Arm Clamp input”…and the tools
in the spindle and the Arm.
1. Remove tools from Spindle and Arm. Press E-Stop
The both side of the Arm have the tools, one person climb up behind the machine and pull the release brake motor
arm to the left , use 12mm socket on the motor shaft to turn counterclockwise (CCW) slowly to make sure the Arm
moves direction far away from spindle.
Use your hand remove the tools both side. Put the hand brake arm motor back.
"
