3D1230 pages

Product Overview

Gigabit Ethernet Bridge with Power-over-Ethernet

Description
The PoE Bridge enables beside the media conversion
the power supply of end devices such as access points,
web cameras and IP telephones via RJ-45 port. The
wide spread positioning of IP cameras results into the
use of fiber optic, because only in this way it is possible
to cover these long distances.
With the use of Power-over-Ethernet (PoE) the
application of 230 VAC power supplies, which have to
be installed parallel to the networking cable by using
the traditional technology, can be avoided. The
networking technician can do the commissioning of the
end devices completely because an electrician is not
required and that results in further cost savings.

Properties
Media conversion for Gigabit (10/100/1000Base-T)
and Fast Ethernet (10/100Base-TX)
Power supply to connected end devices via PoE
(PSE) 802.3af compatible, class0 15.4 W
Optional version with PoE+ up to 30 W
Automatic or manual configuration possible
High class and robust device with integrated 230 V
AC power supply

The Fast Ethernet PoE Bridge supports with the highest
class 0 a maximum output power of 15.4 W. Standard
compliant devices are detected automatically and are
classified accordingly. The Gigabit Bridge is available
with the PoE+ class and therefore offers a maximum
output power of 30 W. With an integrated power supply
the devices are high class and robust. There are
Gigabit and Fast Ethernet versions for multimode and
single mode fiber available.

1/3