29.010.326 Solenoid valve NC, DN 10 three chambers0 pages

Product
Information
Solenoid valve NC, DN 10
three chambers

A.u.K. Müller

Series 29.010.326

Characteristics
servo-controlled
normally closed (NC)
long term performance capability
suitable for hot water up to 90 °C
easy to assemble and service
solenoid replaceable while medium circuit
remains untouched, solenoid rotatable 4 x
90°
any fitting position
high operating safety through the use of high
quality materials and 100% final testing of the
products

Applications

Description
2/2-way solenoid valve of nominal diameter
DN 10 for use with cold and heated potable
water and physically and chemically similar
media. The valve is servo-controlled and
normally closed (NC).
Valves of this design are three chamber straight
valves and can be manufactured with various
connections.
The flow path of the inlet is devided
downstream the first chamber into two subsequent chambers, which have to be operated
separately. The function is similar to two single
valves assembled in line with a redirection of
a flow path.

irrigation systems
industrial appliances
air conditioning
pollution equipment
dish washers
washing machines
water treatments

typical performance curve

One of the outgoing chamber can be designed
as a direct acting valve on request and will
close completely in case of low pressure

45
40

Coil systems for common voltage and
frequency ranges are available.
Electrical operating safety is achieved by
insulation class F and can be supported by an
integrated protective circuit.

30

Q / l/min

By using high quality insulation materials,
continuous duty (100 % ED) at higher medium
temperatures is possible. The glass fibre
reinforced polyamide valve body persists hot
water. Protection against corrosion of inner
parts exposed to the medium is achieved by
using stainless steel.

35

25
20
15
10
5
0
0

1

2

3

4

5

p / bar

6

7

© copyright A.u.K. Müller, technical changes reserved

8

9

E4808

10

1