TRANSCEIVER FSK0 pages

HI-TECH COMPANY
MIPOT S.P.A.
Via Corona, n. 5
(Zona Ind.)
34701 Cormons (GO)
Italy
Tel. +39 0481 630200 r.a.
Fax +39 0481 62387
mipot@mipot.com
TRANSCEIVER FSK
Version: 434 MHz Band / 868 MHZ Band / Code: 3-2000519 / 3-2000519A
DESCRIPTION:
The 3-2000519 and 3-2000519A modules are fully
programmable multichannel PLL based FSK transceivers,
with dual IF conversion and software channel selection
in the 868 Mhz (p.n. 3-2000519A) and the 433 Mhz
(p.n. 3-2000519) ISM bands.
The typical transmission output power is 10 mW
( +10 dBm ) and the sensitivity in receive mode is –108 dBm.
The dual IF conversion, together with the SAW front
end filter, allows for a highly selective module,
with outstanding side channel noise immunity,
ideal for industrial applications and wireless
RS232 and RS485 replacement.
AP P L I CAT IONS :
POS (Point Of Sale)
Bar Code Readers
Wireless Modem
Portable Terminals
Telemaintenance
Teleassistance
Remote Control
MECHANICAL DIMENSIONS:
P IN DE S C R I P T ION:
ABSOLUT E MAXIMUM RAT INGS :
Module Power Supply +Vcc (pin 11) + 6 V
Max voltage on CTS, RTS, TX e RX
(pin 12, 14, 15 e 16) + 6 V
Operating temperature from -20 to +70°C
Storage temperature from -40 to +120°C
Pin Name Description
1 RF IN/OUT IRF in / out pin. During transmission, power can be up to 16 mW. To be connected to a 50 Ohm antenna.
2 GND Ground ( 0 V )
10 GND Ground ( 0 V )
11 +Vcc Positive power supply
12 CTS Clear To Send control signal ( CTS )
13 +Vprog Used only for uP In Circuit Programming. (DO NOT CONNECT)
14 RTS Request To Send control signal ( RTS )
15 TX RS232 serial input pin
16 RX RS232 serial output pin
17 OSC prog Used only for uP In Circuit Proramming. (DO NOT CONNECT)