ASC 67C1A0 pages
www.asc-sensors.de
Piezoresistive Accelerometer
ASC 67C1 / ASC 67C1A
Uniaxial
Signal Amplified („A“)
Wheatstone Bridge
mV Output
Specification SAE J211
Aluminium Housing
Made in Germany
Piezoresistive MEMS Technology
Features
Range: 500g, 1000g and 2000g
Ultra Small Size
Very Light Weight
DC Response
±5000g Shock Resistance
Gas Damped
The accelerometers are based on an advanced piezoresistive MEMS technology and can be
used in a low frequency response up from 0Hz. The piezoresistive sensor element is made of
monolithic resistors. These resistors are attached to carrier-elements and are electrically
connected in a Wheatstone bridge. The electrical signal changes proportional to the vibration.
Options
Customised Cable Length
Customised Connector
TEDS Module
Equipment Exchange (EQX)
The model ASC 67C1 is a uniaxial accelerometer based on piezoresistive technology. The model
ASC 67C1A is a signal amplified uniaxial accelerometer. Both models are small and compact
accelerometers which meet the specifications of SAE J211. The housing is a flat design made
of hard anodised aluminium. Due to low mass, both models are ideal for testing on light-weight
structures.
Applications
Automotive Crash Testing
Shock Testing
The sensing element in both the models has integrated overload stops and therefore the silicon
chip is highly shock resistant. The models ASC 67C1 and ASC 67C1A have an excellent nonlinearity over a wide frequency response. Electrically the units features a Wheatstone bridge
configuration.
Description
The models ASC 67C1 and ASC 67C1A can be obtained with all common sensor ID modules.
A very high flexible and rugged cable provides a simple mounting. The models ASC 67C1 and
ASC 67C1A are factory calibrated and are equipped with 6 meter cable as a standard.
ASC GmbH · Advanced Sensors Calibration · Schäfflerstraße 15 · 85276 Pfaffenhofen · Germany · Tel.
"