OT1200-SL Configurator0 pages
Panel X86 based
OT1200SL-TFX
fanless
Industrial Automation - Products & Configurations
OT1200SL-TFX BASIC SYSTEM
Basic configuration
LCD TFT 12,1"" ▪ Touch-Screen ▪ Intel Celeron M ULV 600MHz ▪ 512 MB RAM ▪ Stainless Steel TrueFlat front panel ▪
fanless ▪ 12 months warranty
PROCESSOR
Intel Celeron M ULV ▪ 600MHz, 400MHz front side bus, 512KB cache ▪ socket 478 µFC-BGA
Intel Celeron 373 M ULV ▪ 1GHz, 400MHz front side bus, 512KB cache ▪ socket 478 µFC-BGA
12,1" LCD TFT 4:3 ▪ SVGA, 800x600, 16M colors ▪ backlight LED, 500 cd/m2 ▪ Viewing angle L:R/U:L (typ.): 80°:80°/80°:60°
12,1" Touch-Screen ▪ 5 wires resistive technology ▪ Controller integrated on board
12,1" LCD TFT 4:3 ▪ XGA, 1024x768, 16M colors ▪ backlight LED, 600 cd/m2 ▪ Viewing angle L:R/U:L (typ): 80°:80°/70°:70°
12,1" Touch-Screen ▪ 5 wires resistive technology ▪ Controller integrated on board
DISPLAY &
TOUCH-SCREEN
15" LCD TFT 4:3 ▪ XGA, 1024x768, 16M colors ▪ backlight LED, 450 cd/m2 ▪ Viewing angle L:R/U:L (typ): 80°:80°/70°:70°
15" Touch-Screen ▪ 5 wires resistive technology ▪ Controller integrated on board
17" LCD TFT 5:4 ▪ SXGA, 1280X1024, 16M colors ▪ backlight LED, 350 cd/m2 ▪ Viewing angle L:R/U:L (typ.): 85°:85°/80°:80°
17" Touch-Screen ▪ 5 wires resistive technology ▪ Controller integrated on board
19" LCD TFT 5:4 ▪ SXGA, 1280X1024, 16M colors ▪ backlight LED, 350 cd/m2 ▪ Viewing angle L:R/U:L (typ.): 85°:85°/80°:80° > note 1
19" Touch-Screen ▪ 5 wires resistive technology ▪ Controller integrated on board
512 MB ▪ 1 SODIMM module DDR2 PC5300
RAM MEMORY
1 GB ▪ 1 SODIMM module DDR2 PC6400
2 GB ▪ 1 SODIMM module DDR2 PC6400
OPTIONS
SSD 2,5"
Installation kit SSD 2.5" SATA (SSD not included) > note 2
SSD 2,5" SATA 2, 3Gb/s (Solid State Disk), MLC
Installation kit HDD 2.5" SATA (HDD not included) > note 2
HDD 320GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer ▪ Advanced Format ▪ 24x7
HDD 2,5"
HDD 500GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer ▪ Advanced Format ▪ 24x7
HDD 320GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer
HDD 500GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer ▪ Advanced Format
COMPACT FLASH
Compact Flash UDMA (SLC)
PCI FANLESS add-on kit (without HDD support) > note 2, 3, 4
PCI & PC/104
PCI add-on kit WITH SINGLE COOLING FAN (without HDD support) > note 2, 4
PC/104 plus add-on predisposition kit (without HDD support) > note 2, 4
COMMUNICATION
PORTS
FIELDBUS
POWER SUPPLY
WIRELESS
RS-232/422/485 serial port ▪ DB15 male connector > note 5
RS-232/422/485 serial port ▪ RS-422/485 optoisolated ▪ DB15 male connector > note 2, 5
NETcore® X APCI fieldbus module ▪ for technical details see pg.190 > note 6
Uninterruptable power supply (UPS) ▪ 15 minutes backup time (min) ▪ equipped with batteries ▪ mounted on PC's rear box > note 4
Extension cable (length 1 m) for remote UPS installation
Wireless LAN Kit with USB interface (IEEE 802,11b/g) ▪ data rate max 54Mbps ▪ WEP 128bit
WARRANTY
EXTENSION
Warranty extension to 18 months on basic system and its variants
Warranty extension to 24 months on basic system and its variants
Warranty extension to 36 months on basic system and its variants
NOTES
1: cULus certification is not available in configurations with 19" LCD TFT
2: 1) the HDD/SSD 2,5" SATA kit, the add-on PCI kit (FANLESS or with FAN) and the PC/104 Plus kit are one is substitution of the other;
2) The add-on PCI kit (FANLESS or with FAN) and the serial optoisolated port are one in substitution of the other
3: Fanless PCI kit can be requested only if add-on cards have less than 3W of power consumption
4: UPS module, PCI and PC/104 plus kits can be supplied only at order time - THEY CANNOT BE INSTALLED AFTERWARDS
PC/104 plus predisposition and PCI kits cannot be installed together
UPS module is supported by Microsoft Win32 operating systems and not by Microsoft WinCE operating systems
5: RS-232/422/485 standard and optoisolated cannot be installed together
6: NETcore X option need PCI FANLESS add-on kit installation
2014.01
pg. 64 / 176
Rel.01
"