Transducer Display ETD0 pages

Benefits
Transducer Display ETD
TECHNOLOGY
SENSOR
Displays torque, peak torque, speed* or power* in the units
specified within the transducer.
Automatically detects and displays the model, range, serial no.
and calibration due date of the transducer.
Provides auto reset of peak torque values.
Provides power to the transducer in place of the standard
power supply unit.
Displays warnings and high temperature if appropriate.
Provides USB output if used with RWT320/340 series with
USB option fitted.
Data parameters measured at 20ºC
Sensor Technology Ltd reserves the right to change specification and dimensions without notice.
ETD3377R (Preliminary)
Overall size 220w x 290d x 100h
(Aluminium enclosure)
Operating temperature range
Power supply
-10ºC - 50ºC
Weight 1.76 Kg
Display update rate 4 Hz
90-250v AC, 50-60Hz,
10W, IEC connector
Channel 1 analog output As specified by transducer
Channel 2 analog output As specified by transducer
Pulse RPM out TTL compatible
Serial output USB Type B
Technical Data
* Provided transducer has speed option fitted and enabled
Display LCD 20 x 4 STN BLUE
The Transducer Display ETD is a readout suitable for all RWT transducers. Although it is primarily used to display torque
and peak torque, it can also display speed and power, provide access to the analog outputs from the transducer and connect
the transducer to a PC for use with TorqView and the Transducer Control Program.
Introduction
Provides access to analog torque outputs and pulse speed*
output.
TECHNOLOGY LTD
SENSOR
68 Heyford Park, Upper Heyford
Bicester, OXON, OX25 5HD, UK
MODEL: ETD
240V/110V 10W/20W
www.sensors.co.uk
SER NO: 12345