Model F32230 pages

| Force | Pressure | Temperature | Switch

Miniature Bending Beam

for forces from 0.25 N
with electrical output

Description

Features

Miniature force transducers are especially
designed to have small dimensions. Because of
their compactness, these force transducers can be
used in a wide range of industrial and laboratory
applications.
They are designed for the measurement of tension
and compression forces in the range between 0,25
N and 50 N.
The field of application of this force transducer lies
in innumerable applications where simple
installation is a very important factor.
The miniature force transducer is mounted on the
cable side. The force introduction takes place at
the opposite side, vertically to the load cell axis via
the provided through-hole.

Note

•
•
•
•
•
•
•

For tension or compression force measurements
With integrated overload protection
Simple force introduction
Compact small dimensions
Ease of assembly
Protection class IP 65
Combined error 0.1% of F.S.

Measuring ranges
• 0.25 N ... 50 N

Applications
•
•
•
•
•

Construction of plant and apparatus
Monitoring of press-in, plug and extraction forces
Tension force measuring at spooling devices
Measurement and inspection equipment
Test benches

In order to avoid overloading, it is advantageous to
connect the load cell electrically during installation
and to monitor the measured value.
A mechanical overload prevention is integrated.

Model: F3223
tecsis GmbH
Carl-Legien Str. 40
D-63073 Offenbach / Main
Tel.: +49 69 5806-0

DE 925_F3223
Sales national
Fax: +49 69 5806-170

Sales international
Fax: +49 69 5806-177

e-Mail: info@tecsis.de
Internet: www.tecsis.de

p. 1 / 2