Model F32100 pages
| Force | Pressure | Temperature | Switch
Bending beam for tension and
Compression forces
with electrical output
Description
Features
Bending beam load cells are suitable for
measurement of compression and tension forces.
The range of applications for this load cell covers
countless industrial applications where high
accuracy, simple installation with a large contact
surface and an inexpensive price play a decisive
role.
The load cell with its simple force transmission
system is easy to handle.
for tension or compression
force measurements
simple force introduction
inexpensive price
compact small dimensions
simple installation
very low installation height
Protection class IP 68
Accuracy 3000 d of OIML
The force is applied perpendicularly to the load cell
axis. The load cell is relatively insensitive to
interfering momentums.
Measuring ranges
Note
Applications
In order to avoid overloading, it is advantageous to
connect the load cell electrically during installation
and to monitor the measured value.
The force to be measured must be applied
concentrically and free of transverse force.
The load cells are to be mounted on a level surface.
5 kg ... 5000 kg
Plant engineering, force
measurment
Laboratory, post and analysis
scales
Measurement and inspection
equipment
Test benches and production
lines
Specific information
Load input elements
available (option)
Model: F3210
tecsis GmbH
Carl-Legien Str. 40
D-63073 Offenbach / Main
Tel.: +49 69 5806-0
DE 925 f
Sales national
Fax: +49 69 5806-170
Sales international
Fax: +49 69 5806-177
e-Mail: info@tecsis.de
Internet: www.tecsis.de
p. 1 / 2
"