FrostSentry0 pages

TEDDINGTON GROUP

Model:
l THS-FS-01
-

l Condensate Pipes from freezing
Prevents
-

Compact
l Trace Heater
-

Straight
l forward to install
-

Auto-sensing, automatic activation when
l
temperature drops below 2.5° C
-

230Vac
l supply
-

Isolated
l low voltage output
-

Constructed to IP 40 Rating
l
-

Works
lwith any make of condensing boiler
-

'Active'
l and 'Standby' Indicator LED's
-

Patent
lApplied for: GB1014462.4
Application

Operation

The Frost Sentry is designed to prevent Condensate
Pipes from Freezing when temperatures fall below 2.5°
C. This compact unit consumes less than 10W in standby
and 30W when at maximum heating.

Once installed, the Frost Sentry will constantly monitor
the external temperature. If it falls below 2.5° C, the Frost
Sentry will activate and gently warm the inside of the
Condensate pipe. The further the temperature drops, the
warmer the temperature in the pipe.

-

Once fitted, this unit will ensure that the Condensate
Pipes from your Boiler or Air Conditioning unit will not
freeze, even down to -20° C.
Physical Description
It is supplied with all parts required to finish*. This unit is
compact and robust. Housed in a strong, flame retardant
white ABS box with a smoked transparent lid which
allows both the Standby LED and Active LED to show
through.

The Frost Sentry comes with 3 metres of Heater Cable, 3
metres of Temperature Probe and 2.75 metres of Clear
Plastic PVC tubing. These can be shortened to a
minimum of 1m metre.
The Frost Sentry is truly a fit and forget device that will
ensure that no-matter how far the temperature falls, to a
minimum of -20° C. The boiler will continue to function in
the harshest conditions.

-

It is supplied with:
1. 2.75m Clear PVC tubing
2. 3m Coaxial Trace Heating cable - 3 pin connector
3. 1m Twin Core Electrical Cable + Connector Block
4. 3m Temperature Probe – 2 pin connector
5. Power Supply Cable
6. Rubber bung
7. T Piece
8. Pipe adaptor

* Does not include condensate pipe.