26 port 10/100M Managed PoE Switch | 24 ports PoE 300W | ES5026-24POE-300W0 pages
Power over Ethernet switches
ES5026-24POE-300W-P(220VAC)
26*10/100/1000M Base-T PORTS POE SWITCH
Features
1. Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W)
2.Transmitting electrical power together with data through a single network cable, free of power lines
3. Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs)
4. Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging
other private standard POE devices or devices without POE function
5. Support port power supply prioritization, guarantee the continuous power supply of key nodes
6.Up to 100m network cable transmitting distance
7.Built-in PSE power supply module, plug-and play design, easy to install
8. High security performance defending against power surge
9.Support short-circuit protection function
10.Energy-saving green design, support auto-switch to standby mode and auto-detect cable length.
11.Support simple WEB management, easy to configure the functions of switches
Introduction
ES5026-24POE-300W-P(220VAC) is Managed PoE switches
With ES5026-24POE-300W-P(220VAC) PoE Switches, you are
support both 10/100M ports and 10/100/1000M ports. All of the
free to position equipments wherever they should be and power to the
copper ports of the ES5026-24POE-300W-P(220VAC) provide PoE
unit with the data over the Ethernet cable, not being limited by the
Power Injector function,complying with IEEE 802.3at compliant
power outlet. You can remotely reboot the device without having to
powered devices with maximum up to 30 watts of power per port.
climb up to or go to the device - just remove its Ethernet cable from
The Switches also come with 2 SFP slots expanding your network
the
flexibly. In addition, it provides high performance, enterprise-level
ES5026-24POE-300W-P(220VAC) PoE Switches are auto-sensing
QoS, advanced security strategies. With all these advanced features,
that make each port only provide power as detecting the presence of
the PoE Switch are ideal choice for small and medium business
802.3af /at PoE supported devices
switch
end
as
adopting
PoE.
All
ports
networking.
Specification
Technology:
Ports:
Standard and Protocols: IEEE 802.3af, Power Over Ethernet, IEEE
Fixed ports: 20*10/100M PoE ports+4*10/100/1000M PoE ports+2*
802.3at, Power Over Ethernet Plus
IEEE 802.3u, 100BASE-TX, IEEE 802.3ab, 1000 BASE-T, IEEE
802.3z, 1000 BASE-X, IEEE 802.3ad, Static or Dynamic Link
Aggregation, IEEE 802.3x, Full-Duplex Flow Control, IEEE 802.3az,
Gigabit SFP ports
PoE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+),7/8(-)
Exchange Properties:
EEE(Energy Efficient Ethernet), IEEE 802.1q, VLAN
100M forwarding rate: 1488095pps
IEEE 802.1p, QoS/CoS, IEEE 802.1d, STP(Spanning Tree Protocol),
100M forwarding rate: 148809pps
IEEE 802.1w, Rapid Spanning Tree Protocol
10M forwarding rate: 14880pps
POE Standard: IEEE802.3af/at
Flow control: Back-pressure traffic control under Half-Duplex mode,
IEEE 802.3x traffic control under Full-Duplex mode
Transmit type: Full wire-speed storage and forwarding
MAC address: 16K, Support auto-update, two-way learning
VLAN: Support up to 4096 VLANs, Port-based VLANs, VLANs
1
"