Software - SoftTesT0 pages
Measurement electronics
Measurement electronics E813 for external force and torque sensors
High-performance digital electronics with replaceable
digital storage (SD memory chip) for recording of
peak values and test series in csv le format (Excel™
compatible). Alternatively, continuous data (ASCII)
transfer is possible via USB 2.0. Furthermore, force
limits can be congured as switch-off criteria, optionally also stroke limits with connection of a path signal,
e.g. by TesT testing devices. Power is supplied by
commercially available AA NiMH batteries. Supports
TEDS technology for automatic sensor detection.
Scope of delivery:
CD with manuals | CD with virtual COM port driver
(optionally visualization software W913) | 230V/50Hz
charger with integrated charging electronics | 3 NiMH
batteries | Factory calibration certicate | Operating
manual | Carrying Case
Sensor interface
TEDS IEEE-1451 compatible interface for unlimited
automated strain gauge sensor detection, 8 memory
slots for conventional strain gauge sensors
Technical Data
• 32-bit RISC microprocessor
• A / D converter: 24-bit
• Measuring frequency: 50…2000 Hz
• Backlit graphic LCD display: 7 digits + point
• Data recording on integrated 2 GB SD
Memory Card
• Analogue output port 0…2 V DC (optional 2-point
calibration)
• 2 open collector output ports for controlling
external devices
• Optional connection of an incremental path signal
(5 V TTL)
• Die-cast aluminium housing RAL7035 with recessed
grips with 2 M6 mounting holes both on each front
side and on the backside for exible installation into
testing devices
• Operating time ≥ 10 h
• Dimensions H×W×D: (170 × 75 × 35) mm
• Weight: ~ 820 g
W913 software for E813 + K323
Features
• Recording of measurement curves with measuring frequency of up
to 2000 Hz
• Live display of measured values as numeric values and graph
• Free scaling of plot
• Automatic maximum and minimum determination
• Manual evaluation of a measuring point on the curve
• Determination of average values over curve section
• Data in Excel™-compatible *.csv format
• Chart export (*.jpg, *.bmp)
• Storage and recall of existing measurement series
• Generation of test reports in *.pdf format, including integration of a
company logo, free documentation elds, comment eld, and results
(max, min, med, fractional value)
• Languages: German, English, French, Spanish and Italian
System requirements:
• Windows™ XP, Vista™ and Windows™ 7 (32-bit and 64-bit)
• Hard disk space min. 10 MB + measurement data
• At least 1 GB of RAM
Storage case
We deliver all instruments with non-ageing, rugged plastics case.
We recommend the storage case for protection during transport
and storage.
www.test-gmbh.com
5