Testboy 260 pages

The Testboy 26 is a cable detector that simplifies searching for cables in
walls and cable ducts.
The depth to which the Testboy 26 can detect depends on the
composition of the wall (for example, brick, plaster, concrete).
A lined case with belt loop is included in the range of supply. It is suitable
for reliably and safely transporting both devices.
Your advantages:
| 5 years manufacturer’s warranty
| TÜV / GS tested and approved
| IEC/EN 61010-1, DIN VDE 0411
| Voltage proofed up to 400V
A carrier signal from the transmitter is modulated either by means of the
alligator clips or the modular connector to one end of the cable. This
allows the other end of the cable to be found quickly and precisely with
the receiver without contact or having to strip the insulation of the cable.
The Testboy 26 can exactly identify the single two-core cable (for
example in telecommunications technology).
As well as being equipped with a socket for earphones for working in
loud surroundings, the sensitivity of the easy-to-use receiver is infinitely
adjustable. The transmitter can optionally transmit either a continuous or
alternating tone. The integrated continuity tester detects short-circuits
quickly and reliably.
Technical Details
Testboy 26
Display
acoustical
Power Supply
2x 9V
Dimensions
230 x 55 x 23 mm ( receiver )
55 x 57 x 23 mm ( generator )
TÜV/GS
IEC/EN 61010-1
Overvoltage Protection 400V
Weight
244g
Colour
red/black, other colour on request
Scope of Delivery
1 x operating instructions
1 x generator
1 x receiver
2 x battery 9V block