SolarClimatic Series Brochure0 pages

SolarClimatic Series
Solar Simulation Chambers
OPTIONS
A wide range of tailor-made accessories is available to further
increase the comfort and functionality of the test units:
• IDF filter for indoor tests.
• Insulated cover: Expands the temperature range to -40 °C to
+120 °C.
• Misting equipment: Expands the test possibilities in the area
of climate.
• UV sensors: 280 nm to 320 nm and 320 nm to 400 nm.
• Regulation of the black standard temperature: Improves
reproducibility while simultaneously ensuring the consistency
of the test conditions.
• Black standard temperature sensor.
• SolarTest sensor: 300 nm to 3,000 nm.
• RS 422/485 interface.
• Printer.
• SIMPATI software.
Differentiation. SC models are equipped with either
MH (Metal Halide) or MHG (Metal Halide Global)
lamps. Since both optical systems are very similar, both
yield equally good results with respect to irradiance
and its spatial distribution. However, the MHG lamp
is recommended for tests requiring an irradiance of
> 1,000 W/m². One important difference lies in the
spectral distribution of the radiation that, at certain
wavelengths, does not exhibit the energy peaks in the
MHG spectrum that are found in the MH spectrum.
These peaks can produce widely differing results in
samples with a corresponding sensitivity. Another advantage
of the MHG lamp lies in the ability to vary
output across a specific range as well in the electronic
power regulation that can, for example, compensate
for mains fluctuations. All SC units are suitable for
laboratory testing using simulated sunlight. The
MHG models, with their powerful MHG lamps and
specific spectral adjustment, are the best solution for
the application area of aging tests (e.g., DIN 75220,
IEC 60068-2-5, or MIL STD 810F).
LIGHT QUALITY
Technical Specifications
SC340 MH
SC600 MH
SC1000 MH
SC2000 MH
SC340 MHG
SC600 MHG
SC1000 MHG
SC2000 MHG
Features
Test chamber volume (liters) 340 600 1,000 3,400 340 600 1,000 3,400
Test chamber dimensions Width (mm) 580 800 1,100 2,000 580 800 1,100 2,000
Depth (mm) 765 800 950 1,150 765 800 950 1,150
Height (mm) 750 950 950 1,510 750 950 950 1,510
Radiation
Radiation source
(W) 1 x 1,500 1 x 1,500 2 x 1,500 4 x 1,500 1 x 1,200 1 x 2,500 1 x 4,000 2 x 4,000
Irradiance (W/m²) 1,200 1,000 1,000 1,000 800 - 1,200 800 - 1,200 800 - 1,200 800 - 1,200
Exposed area (cm²) 1,600 3,000 5,600 13,600 1,600 3,300 5,600 13,600
Performance range for
temperature tests
Temperature range with radiation (°C)
Temperature deviation with radiation (K)
Temperature range without radiation (°C)
Temperature deviation without radiation (K)
Alteration rate, without irradiation
- Heating in accordance with IEC (K/min) 3.0 4.0 4.0 2.0 3.0 4.0 4.0 2.0
- Cooling in accordance with IEC (K/min) 2.5 2.5 2.5 1.5 2.5 2.5 2.5 1.5
Calibration values (without radiation)
Temperature range with radiation (°C)
Temperature deviation with radiation (K)
Humidity range with radiation (% r.h.)
Humidity deviation with radiation (% r.h.)
Dew point range with radiation (°C)
Temperature range without radiation (°C)
Temperature deviation without radiation (K)
Humidity range without radiation (% r.h.)
Humidity deviation without radiation (% r.h.)
Dew point range without radiation (°C)
Calibration values (without radiation)
Technical Data
Power supply
Max. connection load (kW) 6 10.5 15 20 6.2 12 18 26
Max. current consumption (A) 14.5 23 31 43 16 22 32.5 46
Max. cooling water consumption (tap water) (m³/h) - - - 1.1 / 2.2 - - - 1.1 / 2.2
Humidifying water (supplied by customer) demineralized
demineralized
demineralized
tap water demineralized
demineralized
demineralized
tap water
Outer dimensions Width (mm) 865 1,085 1,390 3,500 865 1,085 1,390 3,500
Depth (mm) 1,595 1,655 1,850 1,450 1,595 1,655 1,850 1,450
Height (mm) 2,175 2,380 2,380 2,500 2,180 2,550 2,550 2,700
Weight (kg) 515 625 875 1,400 565 675 775 1,550
3/N/PE AC, 400 V ±10%, 50 Hz
10 to 90
±1 to ±3 in time
+5 to +87
+23 °C / 50% r.h. and +80 °C / 50% r.h.
Performance range for
climate tests
10 to 80
±0.5 in time
±0.1 to ±0.3 in time
±3 to ±5 in time
+23 °C and +80 °C
±0.1 to ±0.5 in time
+10 to +90
+5 to +74
MH (Metal Halide)
±1.0 in time
MHG (Metal Halide Global)
+15 to +80
-20 to +100
-30 to +100
ATLAS MTT GmbH
Vogelsbergstraße 22
D-63589 Linsengericht
Phone: +49-6051-707-140
Fax: +49-6051-707-149
We reserve the right to make changes to
equipment and procedures that reflect
technical improvements as well as
associated changes to parameter values.
Printed in Germany
Bulletin No. 1965 Rev. 1.0
Id.No. 56352171 2C 05/03 VN / RK
ATLAS MTT LLC
4114 North Ravenswood Avenue
Chicago, Illinois 60613 USA
Phone: +1-773-327-4520
Fax: +1-773-327-5787
www.atlas-mts.com