Perfomaster0 pages
W W W . S I M C O - I O N . N L
Industrial Static Control
Perfomaster
High voltage spark over can be used in a controlled way. A spark over from a special electrode to a
ground reference can be detected and evaluated. Perforations in plastic webs can be detected and
counted.
The Perfomaster provides the hardware and software to generate a controlled spark over, detect this and
evaluate the spark over to produce a pulse signal. The pulse signal is available on the output connector
and can be used for counting dtected spark-overs and thus perforations.
The miniaturised design of the Perfomaster contains the electrode as well as the high voltage source. It is
powered by 24 V DC, so no high voltage cable is required. Electrodes are standard fitted with three special
alloy emitter pins and are detachable for replacement or remote placement.
A status LED provides direct system information on the Perfomaster. A green LED signals operation OK.
An intermittent red LED signals a perforation detected.
Supply voltage and output voltage setting to the Perfomaster can be provided in two ways:
1.t Directly from the machine f.e. PLC
2.t With additional external control kit
Technical specifications
Perfomaster
Housing material
ABS / PTFE
Cable
low voltage cable, standard M12 connector
Input power
24 V DC, <0,5 A
Emitter pins
special alloy
Max detection frequency
25 Hz
Signal
Multicolour LED:
- Green, signal “operation ok”
- Red, signal perforation detected
Signal output
Optocoupler
Control voltage
0 - 10 V DC or 0 - 24 V DC
Ambient temperature
0 - 55°C
Use circumstances
industrial
Protection classification
IP 54
"