WINDLUB Single-Line Centralized Grease Lubrication System for Wind Energy Systems0 pages
1-3036-EN
WINDLUB
Single-Line Centralized Grease Lubrication System for Wind Energy Systems
Advantages of the SKF WINDLUB singleline centralized lubrication system
Designs
The SKF WINDLUB single-line centralized
lubrication system is available in KFG pump
designs with and without a control unit, as
well as in a CAN bus version on request.
The single-line pumps are available as both
stationary and rotary pumps. The delivery
volume of the pumps is 0.8 to 5.0 cm3/min,
depending on the pump element used.
The metering element on the SKF single-line
system is a piston distributor of the VR series.
This distributor is designed as a prelubrication distributor and is characterized by its
high pressure resistance (315 bar), a fitted
control piston and high relief pressure
(30/70 bar).
• High-pressure technology with a grease
follower plate which makes it suitable for
rotary operation use in the fixed or rotor
section
• Even greases with high solids content can
be fed easily
• Available as a pre-assembled kit, which
means low mounting effort and a reduced
incidence of mounting errors
• Individual supply of lubrication points
which provide high apportioning accuracy
and separate supply of individual lubrication points
• Electronic fill level control which allows
centralized monitoring of the fill level by
the wind energy system's control system
• Visual stroke monitoring of the lubrication
cycle via an indicator pin which allows
monitoring of lubrication directly at the
individual lubrication points
• Distributors feature quick connector technology, which results in reduced mounting
time and expenses
• System components available in corrosionresistant design which makes them suitable for offshore applications
• Available with CAN bus control on request