Compact Water Pump & Heavy Duty Water Pump0 pages
www.ppsgb.com
Product Data Sheet
Heavy Duty Waste Water Pump
Overview
The Heavy Duty Waste Water Pump offers the ability to pump water levels down to 1mm. It
is capable of a flow rate of up to 170 litres per minute with a maximum head of 11 meters.
Features
•
•
•
•
•
Steel outer casing, cast aluminum pump stand and rubber pump chamber
Urethane vortex impeller
Removes waste water down to 1 mm depth.
Maximum submersion 20 m
IP 68
Specification
Part Number
PS20042 - 110v / PS20062 - 230v
Weight
Discharge Connection
Materials
12 kg (dry weight of the pump without cable)
1” (25mm)
Shaft Seal
Double mechanical seal in oil bath
Primary Seal: silicon carbide
Secondary Seal: Ceramic on carbon
Electric Motor
Impeller: Urethane Rubber
Motor frame: Aluminum die casting
Outer: Steel sheet
Shaft: SUS403 (EN-X6Cr13)
Dry-type submersible induction motor,
Insulation class E, 2 poles, 2850 r.p.m.
Capacitor start
Voltage: 110V/240V, 50Hz, 1-phase or 2-phase
Power input: 0,59kW
Power output: 0,48kW
Nominal current: 6, 2A (110V)
Start current: 14, 2A (110V)
Compact Pump
Overview
The compact semi-submersible pump with polypropylene casing is suitable to pump clear
water containing particles with maximum diameter up to 5 mm.
Features
•
•
•
•
•
•
•
•
•
•
Anti-corrosive and rust-proof materials
Integrated float switch
Very low priming and starting level of the pump (10 to 15 mm)
Easy access through sliding cover to float switch for cleaning
Motor with thermal overload protection
Excellent cooling of the motor that enables the pump to operate even when it is partially submerged
Supplied with power cable, plug and non-return valve
Lever for quick selection of manual or automatic mode
Removes waste water and solids up to 5 mm, down to a depth of 3-6 mm
Motor can be partially submerged for short term operation IP68
Specification
Part Number
PS20042 - 110v
Part Number
PS20062 - 230v
Weight
5.1 kg
Versar PPS reserves the right to change, modify or discontinue any product listed. Images may be slightly different than actual products.
Protection House, Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8HX, Phone: (+44) 01908 272240
L0030