Product MG25 T.V.E.0 pages
PRESSE PER IMBALLAGGIO | AUSONIA SRL Via Balegante, 25 31039- RIESE PIOX° (TV) Italia Tel. 0423 755303 - Fax 0423 759126 E mail:info@ausoniasrl.it www.ausoniasrl.it Partita iva 03315980262 iscr.reg. impr. TV 312041-1997 Product MG25T.V.E. Vertical hydraulic press for compacting and shaping bales or recyclable materials such as: cardboard paper, nylon plastic, big-bags, fibre-glass and insulation in general, expanded and soft polyurethane, tyres, fenders and petrol tanks, polystyrene, sponge foam, PET and tetrapak bottles, leathers, rags, cloths, generic trash, etc. ... The model MG25 T.V.E. press features a fully-closed compacting chamber. The materials loading and bale ejecting doors can be opened. The electrical panel is located on the side with built-in command buttons. The material is front-loaded, the materials holding systems optimise loading times, ensuring that the loading chamber is always empty at the end of every pressing cycle. - Beeper announces that the bale is ready. This system lets you guarantee that the bales area all similar to each other, in terms of weight and dimensions. The beep height is adjustable. - Tin, can and small drum compactor platen accessory. - Liquid containment and collection drip pan. - Roof cover for outdoor positioning. - ATEX directive-compliant electric panel and remote control-unit. - Electrical panel located up high and buttons on side - Extended cylinder to yield smaller bales. - Addition of two transversal bindings. - Binds with closed doors for very plastic crush-resistant materials. - Fan-type holding system for particular materials. - Blocks for excluding the holding systems of crushed materials. - Dust suction and collecting hoods in loading chamber. - Pre-varnish galvanisation to protect from any aggressive substances. - Quick-link tying carter. Thanks to carters on the back of the machine tying is possible with quick-link steel wire (with eyelets) while working only in front of the machine. - Slotted front doors for closed-door binding, suited for extremely elastic return materials. The compacting cycle (up and down compactor phases) is button-operated automatic Bale binding is preset with open doors, it is bound manually, with highly -resistant polypropylene banding (4 coils are supplied) . Thanks to the slots on the back of the chamber, steel wire or bands can be used to bind. Bales are automatically ejected by a belt fitted to the back wall of the press, which is activated by the rising plate. Closing the bale expelling door is done by hand wheel. This ensures safety when opening especially with the more elastic materials. The press can be positioned against a wall. It only needs front space for material to be loaded and to expel the bales. The hydraulic circuit is fitted with a safety locking valve to prevent the platen from falling. The press is made be fastened to the ground. It can also be installed outdoors, provided the control unit assembly and control panel are protected. The press is epoxy varnished. The standard press colour is RAL 7016 grey , moving parts and protections are RAL 1007 yellow. The colours can be changed according to the RAL table . The press is tested at the Ausonia works prior to being shipped. La MG18 T.V.E. is shipped horizontally, on its side, and with a full canister of oil inside the press itself. Upon delivery, simply straighten the press, fill the tank with the supplied oil, check the electric motor's sense of rotation and machine is ready for use. The usage and maintenance manual delivered with the press, and which must be read by operators prior to use, explains every detail for every operation and the use of the machine. AUSONIA SRL - Via Balegante, 25 31039- RIESE PIOX° (TV) Italia - Tel. 0423 755303 - Fax 0423 759126 E mail:info@ausoniasrl.it - www.ausoniasrl.it - Partita iva 03315980262 - iscr.reg. impr. TV 312041-1997
"