BTRS Jr. Bench Top Reaction System0 pages
The World Leading Provider of High Pressure Equipment for Research and Industry since 1945!
BTRS-Jr®- PC
General
Information
The BTRS-Jr®-PC is a complete reaction system for vapor phase catalyst evaluation and
continuous flow process analysis. The unit is comprised of three major sections, the feed
section, the heated process sections, and the control module with supervisory computer
system. The majority of the process components are housed within an oven enclosure that
is maintained at an isothermal temperature.
System Ratings
Operating Pressure: Atm, 30 bar, 100 bar, 200 bar (Atm, 435 psi, 1450 psi, 2900 psi)
Reactor Temperature: 75ºC to 1000ºC (167ºF to 1832ºF)
Oven Temperature: 250ºC (482ºF)
Dimensions
Cabinet: 117 cm (46”) wide x 84 cm (42”) tall x 36 cm (14”) deep.
Heated Oven: 31 cm (12”) wide x 61 cm (24”) tall x 21 cm (8”) deep.
Power: 215 to 245 VAC, 50/60 Hz, 20 Amp, Single Phase
Wetted Materials: 300 Series Stainless Steel, Teflon®(PTFE), Kel-F®(PCTFE), Kalrez®, Nitronic®
60, Vespel® (Polyimide), Nickel alloy A-286, Incoloy-800HT, HR-160, and Quartz.
Bulkheads: Compression fittings for stainless steel tubing with nominal 3.18 mm (0.125”) OD x
1.6 mm (0.0625”) ID.
Filter Size: 7 micron.
Metering Valves: 18 turn, 1.19 mm (0.047”) orifice, 1” stem, 0.010 CV micro metering handle.
Ball Valves: 3-way, 180º actuation for directional flow switching and shut-off.
Check Valves: O-ring seal design, 1.4 bar (20 psi) cracking pressure.
Thermocouples: Type-K (Nickel-Chromium & Nickel-Aluminum).
Tubing: 3.18 mm (0.125”) OD x 1.6 mm (0.0625”) ID 316 Stainless Steel Seamless tubing.
Notes:
Kel-F® is a registered trade name of 3M Company. In 1996, 3M discontinued manufacturing of Kel-F & today, all PCTFE resin is manufactured
by Daikin under the trade name of Neoflon® or by Allied Signal under the trade name of Aclon®. Kel-F is still the most commonly
used trade name used to describe PCTFE. Teflon® and Vespel® are registered trademarks of Dupont Co., Wilmington DE. Kalrez® is a
registered trademark of Dupont Dow Elastomer, Wilmington DE. Nitronic® is a registered trademark of AK Steel Corporation, Middletown
OH produced under license by Electralloy Div. of G.O. Carlson Inc., Oil City PA.
Autoclave Engineers, A Division of Snap-tite, Inc reserves the right to substitute an equivalent material for trademarked material. Autoclave
Engineers purchases substitute materials based on specification conformance, typically a widely accepted specification created by
an industry standards organization.
The customer is responsible to confirm the compatibility of process fluids (at operating temperatures) with the wetted components of
the reactor.