VC44380 pages
The VC4438 is one of the world‘s fastest and most
excellent Smart Cameras with computational power of
8000 MIPS rivalling a 7.2 GHz Pentium. It has 64 MB
DRAM, 4 MB Flash EPROM for program and data
storage (expanded by the standard 512 MB SD card
inside). It can acquire full frame 640 x 480 pixels at 63
frames per second!
SPECIFICATIONS
VC4438
SENSOR
1/3“, 640 (H) x 480 (V) pixels
SHUTTER
high-speed: up to 5 µs
low-speed: up to 8 s
adjustable integration time
INTEGRATION
full frame progressive scan
The own internal operating system ’’VCRT’’ of the
VC4438 is multitasking. This means that multiple
processes can be executed in parallel.
FRAME RATE
63 fps (126 fps with 2 times binning)
ACQUISITION
asynchronous, program controlled
or external trigger, full frame
A/D CONVERSION
1 x 25 MHz / 10 bit
PROCESSOR
8000 MIPS, 1 GHz
Texas Instruments TMS320C64xx
IMAGE DISPLAY
B&W or pseudocolor from
3 x 8 bit RGB lookup table
IMAGE/
DATA MEMORY
64 MB SDRAM
FLASH MEMORY
4 MB Flash EPROM (non volatile
memory) for programs and data,
programmable
in the system
DIG. I/O’S
4 inputs / 4 outputs optically
decoupled 24 V, outputs 4 x 500 mA
INTERFACES
RS232 up to 115 . 200 baud max.
AND
100 Mbit Ethernet
VIDEO OUTPUT
SVGA 800 x 600 (VESA standard)
SUPPLY VOLTAGE
24 V +/-20 % DC, max. 300 mA
ELECTRICAL
CONNECTIONS
I/O (DC In, PLC, 12-pin),
V24 (6-pin), Trig (trigger/keypad, 6-pin),
VGA Out (10-pin)
DIMENSIONS
approx. 110 x 50 x 35 mm, approx. 400 g
The Smart Camera has also a High-Speed Trigger input
with absolute constant capture delay, which allows
absolutely jitterfree image acquisition even at very highspeed processes.
And whereas a standard progressive scan camera
gets a trigger, starts exposure and then reads out the
pixel data, the VC4438 has optimized the image
acquisition process so that exposure, read-out and the
image processing can be done in parallel.
It has an 8 bit colour overlay which can operate in opaque
or semitransparent mode so that you can block out or still
see the underlying image.
All Vision Components Smart Cameras are built for
industrial applications. They are insensitive to shock and
vibration, and have multiple I/O lines for direct control of
external equipment. For more complex control tasks, they
can easily be inter-faced to a PLC.
No liability is assumed for possible errors!
"