SONOAIR - non-destructive material testing with air-coupled ultrasound0 pages
Technical Data
General Data
19‘‘ unit consisting of
SCANNER
PC with Windows 8.1 and system software
SONOSTUDIO;
Digitizer 16 Bit, 100 MS/s;
Transmitter unit;
Receiver unit
Scanning area
(X x Y x Z)
500 x 500 x 160 mm
Positioning accuracy
20 µm
Scanning increment
Minimum 50 µm
Operating temperature
5 to 40 °C
Network interface
1 GBit/s LAN
Probes
Protection class
IP20
SONOSCAN CF series with robust stainless steel housing
Standards
IEC 61010, IEC 60204
Frequency range
50 kHz to 400 kHz
Relative sensitivity
Up to -30 dB
Transmitter
Number of channels
1, 2 or 4
Resolution
Up to 2 mm
Pulse height of the
output signals
8 to 500 V (optional up to 800 V)
Focusing
Frequency range
50 kHz to 3 MHz
Permanent focus with shaped lens
or electronically adaptable focus with
3 channel Fresnel zone design
Average power
50 W
SOFTWARE
CW operation
Possible
Easy to operate and intuitive graphic user interface
Square wave burst
transmitter
Freely configurable
(the pulse width can be selected
individually for every square wave pulse
of burst)
Separate windows for parametrization of the system components
(transmitter, receiver, scanner)
Individual screen layout
Storing of complete A-scans for every measurement point
during the testing process
Receiver
Number of channels
1, 2 or 4
Repositioning of the gates after the measurement
Frequency range
25 to 650 kHz (optional up to 3 MHz)
Individual signal processing algorithms e.g. for filters
Gain
0 to 120 dB, selectable in 0.5 dB steps
Noise
1 nV/√Hz
Display of the test results as A-, B-, C- or D-Scan
Storing and documentation of complete data sets
Ultrasonic Testing Technology “Made in Germany”
SONOTEC was founded in 1991 by the two physicists Dr. Santer
zur Horst-Meyer and Hans-Joachim Münch and is still owner
operated. With currently more than 140 employees SONOTEC
is a growing technology company highly renowned as solution
provider for ultrasonic measurement technologies especially
in the field of non-destructive testing (NDT). The integration of
a strong R&D department and flexible manufacturing makes
SONOTEC the ideal partner for multiple customers from
different industries.
SONOTEC preserves the right to change technical specifications without further notice. (Rev. 3 / 2015-10-12)
phonet +49 (0)345 / 133 17-0
faxtt
+49 (0)345 / 133 17-99
e-mailtsales_eu@sonotec.de
webtwww.sonotec.eu
SONOAIR
Non-destructive Material Testing with Air-coupled Ultrasound
Made in Germany
SALES & SUPPORT
SONOTEC Ultraschallsensorik Halle GmbH
Nauendorfer Str. 2
06112 Halle (Saale)
Germany
Inspection System
Certified according to ISO 9001
"