CSM & CSH0 pages

Specifications
CSM MECHANICAL DRIVE
CHASSIS
POWER TRAIN

ENGINE

REAR AXLE
FRONT AXLE
STEERING
BRAKES
WHEELS AND TIRES

HITCH
HYDRAULIC SYSTEM

APPLICATION RATE
CONTROL
REAR RECEIVING
SYSTEM
CONVEYORS

FRONT SPREAD
HOPPER
SPREAD HOPPER
WIDTHS

Lower members are structural box beams, unit welded to rear and front axle
carriers. Conveyor sides have welded front triangular bracing to form a
completely unitized structure.
Hydrostatic front wheel drive with closed loop feedback. Three modes of
operation for speeds 0-20 mph (0-32 km/hr) including automatic speed control.

Oscillating truck-type, 16,000-lb rated capacity.
Orbital type, full hydraulic powered, no mechanical linkage.
4-wheel hydraulic power. Front: drum-type; rear: disc-type

Chip Spreaders

CSH HYDROSTATIC DRIVE

Lower members are structural box beams, unit welded to rear and front
axle carriers. Conveyor sides have welded front triangular bracing to form
a completely unitized structure.
14” diameter clutch and 5-speed forward, 1-speed reverse transmission
with 2-speed rear axle.
Option: Hydraulic reversing capability for speeds of 0-19 mph (0-30.6
km/hr).
Cummins Model QSB4.5, 4-cylinder, turbo-charged diesel, 275 cu in, 160
HP at 2,200 rpm. Liquid-cooled with heavy-duty radiator, variable speed
governor, dry-type air cleaner, electric starter, alternator, battery and
fuel-water separator
Electric 2-speed, all planetary drive, 26,000-lb rated capacity.

Oscillating truck-type, 25,000-lb rated capacity.
Orbital type, full hydraulic powered, no mechanical linkage.
2-wheel hydraulic power assist disc brakes in front; hydrostatic dynamic
braking with self-energizing, disc-type emergency/park brakes in rear.
Four 385/65R 22.5, load range J duplex radial.
No options.

Budd disc-type with 11.00 x 22.5, load range H, 16-ply rated, truck-type
with highway tread.
Options:
11.00 x 22.5, load range H, 16-ply rated dual rear tires
Four 385/65R 22.5, load range J, duplex radial
Positive locking, hydraulic release with safety catch.

Chip Spreaders

Caterpillar Model C6.6, 6-cylinder, turbo-charged diesel, 402 cu in, 173 HP at
2,200 rpm. Liquid-cooled with heavy-duty radiator, variable speed governor,
dry-type air cleaner, electric starter, alternator, battery and fuel-water
separator.
4-wheel drive: planetary final drives, 20,000-lb capacity.
2-wheel drive: planetary final drives, 22,000-lb capacity.

Positive locking, hydraulic release with safety catch, hydraulic height
adjustment.

3-section hydraulic pump directly driven from engine crankshaft,
independent circuits for each conveyor, hopper spread roll and agitator,
power steering, power brakes, 30-gal (113.5 l) reservoir, filters, cooler and
valves included.
Not an available feature with the CSM model.

Single variable displacement pump and valve provide independent circuits for
each conveyor, hopper spread roll and agitator, power steering, power brakes,
30-gal (113.5l) reservior, filters, cooler and valves included.

9’6” (2.9 m) wide, 3.5 cu yd (2.68 cu m) struck capacity with feed control
gates adjustable from operator platform.

11’10” (3.6 m) wide unfolded, 4.0 cu yd (3.06 cu m) struck capacity with
paver-style folding wings, feed control gates adjustable from operator platform.

Two independently-operated, 20” (51 cm) wide, hydraulically-driven belts.
Full length side skirting, self-cleaning tail pulley with adjustable and
removable trough idlers. Variable speed conveyors and automatic conveyor
controls.
Radial cut-off gates adjustable in 6” and 12” (15.2 cm and 30.5 cm) wide
increments, full width reject screen (grizzly). Hydraulic power assist gate,
open/close control.
10’ (3.04 m) width standard. Optional widths: 11’, 12’, 13’, 13’6”, 14’,
14’6”, and 15’.
Left- and right-hand stations with suspension seats with swing-over
steering wheel and control/instrument panel.

Two independently-operated, 20” (51 cm) wide, hydraulically-driven belts. Full
length side skirting, self-cleaning tail pulley with adjustable and removable
trough idlers. Variable speed conveyors and automatic conveyor controls.

Single variable displacement travel pump system to maintain accurate
application of aggregate on road surface regardless of changes in speed.

Electro-hydraulic power gate control of 6” and 12” (15.2 cm and 30.5 cm) wide
increments with infinitely variable gate openings and automatic shut off.

INSTRUMENTS

Right-hand, full-length, non-skid walkway and safety handrails with
conveyor and deflector controls; second hitch control.
Ignition switch; engine throttle; conveyor controls; hitch controls; 2-speed
control; graphic display engine gauges for water temperature, engine oil
pressure, tachometer, fuel, volt meter, hour meter, hydraulic temperature,
warning system and engine fault codes; lockable cover.

WARRANTY
MISCELLANEOUS

One year warranty
50-gal (189.3 l), lockable fuel tank; toolbox; ladders each side and safety
handrails; electric backup alarm and warning horn; light package.

10’ (3.04 m) width standard. Optional widths: 11’, 12’, 13’, 13’6”, 14’, 14’6”,
and 15’.
Left- and right-hand stations with suspension seats with swing-over steering
wheel and control/instrument panel. Automatic conveyor control to control
amount of material in spread hopper.
Right-hand, full-length, non-skid walkway and safety handrails with conveyor
and deflector controls; second hitch control.
Ignition switch; joystick control of speed and direction; engine throttle; spread
hopper/conveyor controls; hitch controls; park brake and 4-wheel drive; graphic
display of machine settings and engine gauges for water temperature, engine oil
pressure, tachometer, fuel, volt meter, hour meter, hydraulic temperature,
warning system and engine fault codes; lockable cover.
One year warranty
50-gal (189.3 l), lockable fuel tank; toolbox; ladders each side and safety
handrails; electric backup alarm and warning horn; light package.

PAINT

LeeBoy Highway Yellow
Aggregate placement screen, hydraulic reverse, left-hand spread hopper
walkway and handrails, front hopper railings, second front hopper agitator,
vandalism protection package, non-standard paint.

LeeBoy Highway Yellow
Remote hydraulic individual gate control, aggregate placement screen, left-hand
spread hopper walkway and handrail, front hopper railings, second front hopper
agitator, vandalism protection package, non-standard paint.

DRIVER STATION
OPERATOR STATION

OPTIONS

LeeBoy makes continuous improvements to all its products and reserves the right to
change specifications without notice. Photos and illustrations may contain standard
and optional equipment.

Chip Spreader 09-10 2K
#13837

Contact your LeeBoy dealer:

VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • 704.966.3300

Chip Spreaders
Features include:
•
•
•
•

Automatic Conveyor Belt Controls
Automatic Application Rate Control (CSH only)
Positive Traction Control (CSH only)
Swing-Over Control Console

• 10- to 15-foot Spread Hoppers
• 160 HP Cummins Engine (CSM only)
• 173 - 203 HP Caterpillar Engine (CSH only)

Designed with the Paving Professional in Mind.®