TE90 , TE91 , TE920 pages
Thermostats
DATA SHEET
S
5
TE90, TE91, TE92
Strap-On and Immersion Thermostats
YEAR
WARRANTY
SPARTAN
SPARTAN
SPARTAN PERIPHERAL DEVICES
TAN
HERAL
S
Description
Spartan Strap-On Thermostats TE series can be used for diverse
applications such as temperature monitoring for floor heating systems
(Pump override switch when the max. temp. is reached) or as a
temperature controller for heating or cooling applications, regulation of
boilers, buffer tank controls, and switching in applications with different
heating sources as automatic heating/cooling changeover.
The major advantages of these thermostats are their compact design,
robust construction, simple installation and easy adjustability.
The thermostats are manufactured with a liquid sensor, with activates
an internal spring switch.The fast response and the precision
adjustment results in an accurate switching point.
TE90/TE91
Features
• Electromechanical thermostats
• Tested according to VDE and DIN 3440
• Metallic fastening ribbon (TE90 and TE91)
• Set temperature adjustable with rotary knob
• Pre-setting • Precise liquid sensor
• Change-over contact 250 V AC, 15 (2,5) A
• Switching differential +/- 4 K of rated value • Protection class IP 40
• TE92 Immersion tube: connection R 1/2”, length 145 mm, dia.10 mm
TE92
Set Point Locking Instructions
Pull off the black temperature dial. Remove the yellow locking device.
Replace the black dial pressing it firmly in place and turn it to the
required temperature setting. Pull off the black dial again. Replace the
yellow locking device with the arrow pointing to the upper right hand
corner. Replace the black dial onto the thermostat pressing it firmly
into place.
Technical Data
TE90
TE91
TE92
Setting range °C
10…60°C
(50…140°F)
20…90°C
(68…194°F)
10…90°C
(50…194°F)
Max. permitted sensor temp.
65°C (149°F)
120°C (248°F)
120°C (248°F)
Max. approved ambient temp.
–20…+60°C
(-4…140°F)
–20…+60°C
(-4…140°F)
–20…+60°C
(-4…140°F)
Application
with metal ribbon
on pipes up to 2"
with metal ribbon
on pipes up to 2"
with immersion
pipe R = 1⁄2"
Dimensions
Rated voltage . . . . . . . . . . . 250 V
Rated current. . . . . . . . . . . 15 (2,5) A
Switch contact . . . . . . . . . . 1-pole
Protection type / class . . . IP 40 / I
Test Class . . . . . . . . . . . . . . II
Cable connector . . . . . . . . PG 11
Switching difference . . . . . 4 K
3.94” x 1.57” x 1.50”
(100 x 40 x 38 mm)
3.94” x 1.57” x 1.50”
(100 x 40 x 38 mm)
3.94” x 1.57” x 1.50”
(100 x 40 x 38 mm)
Electrical Diagram
TE90/TE91
1. Add approx. 2-3 mm heat conductive paste on
the entire surface of the base and hold it where it
should be placed.
2. Fasten the thermostat on the pipe with the metal
ribbon.
TE92
Insert the immersion sensor in the immersion pipe
and fasten it in place with the screws provided.
Do not twist or fold the capillary pipe.
Diameter of the immersion probe 5/16” (8 mm).
Electrical Connection
TE90, TE91 and TE92
Connector 1 and 2
= opens by increasing Temperature
Connector 1 and 4
= closes by increasing Temperature
Installation and Ground according to the regulations
of VDE and local laws and regulations
Spartan Peripheral Devices telephone: (450) 424-6067 • fax: (450) 424-6071 • email: info@spartan-pd.com • website: www.spartan-pd.com
TE90/91/92Thermostats
9 August 2012