DSF-100 pages

®

Small Diameter Split Frame
SDSF

DESCRIPTION

The Small Diameter Split Frame (SDSF)
is an externally mounted machine tool
for cutting, beveling, and counterboring
pipe from 0.84” to 4.5” diameter. The
SDSF is also capable of performing
socket weld removal and chipless wheel
cutting. Lightweight and flexible, the
SDSF is optimized for low-clearance
environments. It offers simple setup
and operation, featuring a self-squaring
clamping system for precise cutting
results typically available only with fixed
machine tools.
The SDSF operates on air or electric
power using standard Wachs motors and
adapters. A variety of tool slides and
other accessories are interchangeable
with all SDSF models. Best of all, the
SDSF features E.H. Wachs’ legendary
durability, designed and built for years
of reliable service.
SMALL DIAMETER SPLIT FRAME
FEATURES

•t Built to withstand greater loads than our
already rugged LCSF line
•t Machine quickly splits to mount around
Outside Diameter of in-line pipe.

•t Cuts and bevels pipe up to 7/16” wall including
carbon steel and its alloys, Hastelloy™,
Inconel™ and other exotic materials.

Axial slide for socket weld removal

•t Self-squaring pipe clamping system, using
either collets or integrated, close tolerance
legs with wide feet stability.
•t Feed system offers low clearance operation
with precise feed for controlled cutting.
•t Low friction adjustable bearing system
provides maximum stability and extended
machine life.
•t Fully enclosed bearing and drive gear system
for operational safety.

Wheel Cutting Module for FME cutting

•t Infinite motor positioning.
•t Modular tool slides.
•t Lever type trip actuation for safety.
•t Spring loaded axial trip for crash resistance.
•t Improved radial trip geometry for crash
resistance and durability.
•t Improved bearing adjustment design.
•t Improved durability in pinion gear bearing
arrangement.
•t Easier assembly and disassembly of frame
halves.

Counterbore attachment fits all models Mounts securely to tool slide

•t Improved sealing for chip exclusion.
•t Improved collet spring design.
•t Captive fasteners used for all accessories.
•t Reduced fastener count for simplified
inventory. Only 3 hex wrench sizes required to
operate machine.
•t All 2” through 4” machines can mount using
collets or clamp feet.
Double drive pinion housing

E.H. WACHS
600 Knightsbridge Pkwy. • Lincolnshire, Illinois 60069 • 800.323.8185 • +1.847.537.8800 worldwide • +1.847.520.1147 fax
www.ehwachs.com