TCS Series AC Current Interface for PLC or AC/DC Loads 0 pages

نسخه متنی

AC Current Sensor; PLC Interface Module

TCS Series Current Sensor

Description

The TCS Series is a low cost method of GO/NO GO current detection. It includes a solid state output to sink or source current when connected directly to a standard PLC digital input module. Its normally open or normally closed output can also be used to control relays, lamps, valves, and small heaters rated up to 1 A steady, l0 A inrush. The TCS is self-powered (no external power required to operate the unit) available with an adjustable actuation range of 2 to 20 A or factory fixed actuation points from 2 to 45 A.

Operation

Normally Open: When a current equal to or greater than the actuate current is passed through the toroidal sensor, the output closes. When the current is reduced to 95% of the actuate current or less, the output opens.

Normally Closed: When the current through the toroid is equal to or greater than the actuate current, the output opens. When the current is reduced below 95% of the actuate current, the output closes.

Connection

L -,
■-r"	p sl	~ < \ + (
o 1		~ < \ + (
>

Cio;

I Direct Connection to a PLC Digital Input Module

13 ... 50 V DC, 24 ... 240 V AC in 2 Ranges

II A Steady - 10 A Inrush I Actuation Points -

2 ... 45 A (Fixed Units) 2 ... 20 A (Adjustable Units) I Normally Open or Closed Solid State Output I Complete Isolation Between Sensed Current & Control Circuit

Positive Switching

I;	3
0
Lr

Negative Switching

Function

SVI @

Approvals:

GO/NO GO Sensing

-E>

3l-

Sinking

L = Load V = Voltage PS = Power Supply PLC = PLC Digital Input Module R = Reset TP = Trip Point OC = Monitored Current NO = Normally Open Output NC = Normally Closed Output

Accessories

PLC

Female quick

connect

P/N:

P1015-64 (AWG 14/16)

PLC

Sourcing

Quick connect to screw adaptor P/N: P1015-18

h-E>

Monitored AC conductor must be insulated.

Mounting bracket P/N: P1023-6

Ordering Table

DIN rail P/Ns: 017322005 (Steel) C103PM (Al)

TCS Series

Output Voltage

-G- 3 ... 50 V DC 1 - 24 ... 240 V AC

Actuate Current

-A - Adjustable 2 ... 20 A

-Specify Fixed -Actuate Point 2 ... 45 A in 1 A increments

Output Form

-A - Normally Open B - Normally Closed

DIN rail adaptor

P/N: P1023-20

'Jl -

See accessory pages for specifications.

Example P/N: TCSGAA Fixed

TCSH20A

8.8

Low Voltage Products & Systems

1TRC001009C0201

ABB Inc. • Sales Information 1-888-385-1221 • Technical Assistance 1-800-377-SSAC (7722) • www.ssac.com

درباره سازنده

اطلاعات تماس

TCS Series AC Current Interface for PLC or AC/DC Loads 0 pages

تمام کاتالوگها و بروشورهای فنی شرکت SSAC

IRAN INDUSTRY EXPO

خدمات بازرگانی