ODAC® 63TRIO0 pages
3-Axis Laser Measurement –
The New Solution for Accurate Diameter
and Ovality Measurement.
ODAC® 63TRIO
The ODAC® 63TRIO measuring head supplements
the program of 3-axis laser measuring systems with
a measuring field of 64 mm (2.52 in.).
The principle is the same as for the smaller model
ODAC® 33-TRIO, which pioneered the synchronous
3-axis measurement. Since commissioning the first
system, the 3-axis measurement has been hugely
successful.
The accurate detection of out-of-round condition,
regardless of the orientation of the product ovality
in combination with the reliable and fast diameter
measurement as well as other valuable functions, are
features that no "ODAC TRIO customer" would like
to do without.
Comparison of 3- and 2-axis measurement:
without
With or play
local dis
•t Scan rate = 3 x 600/s, F version = 3 x 1500/s
•t Integrated processor
•t Calibrated single scan CSS
•t Single scan monitoring
•t Data rate up to 200/s
Orientation of the object
2-axis
t Depending on version of measuring head, number of transmitted
measured values as well as the baud rate of the interface.
3-axis
Mean value
3-axis
2-axis
Ovality
3-axis
2-axis
Ovality not
detectable!
Main Advantages
•t 3 synchronized measurement axes on 1 single plane
•t Ultra compact
•t Reliable detection of out-of-round condition, regardless of
t the orientation of the product ovality
•t Detects any deviation from roundness of oval and out-of-round
t with polygonal shape (multi-lobe)
•t Special beam geometries available:
t •t Narrow beam version for the:
t t –t contour measurement
t t –t detection of surface faults
t t –t measurement on very uneven surfaces
•t Yields highly accurate mean value, regardless of the orientation
t of the product ovality
•t Computes accurate values of circumference and cross section t
t ► important for fittings of tubes and hoses
•t Increased measurement accuracy and reliability
•t Integrated fault detector offers 3 times higher detection certainty
t and sensitivity than 2-axis models
•t Choice of interface: "J" standard for USYS, RS-232/-422/-485,
t PROFIBUS DP, ETHERNET, CAN-Bus (on request)
•t Serial interfaces for service PC and local display LOC 01
•t Port for analog interface (option) and proximity switch Namur (option)
•t High dirt and dust tolerance
•t Easily removable splash guards (snap in/snap out)
•t Extensive program of accessories (page 3)