Portable Gas Analyzer

PGM-IR

Features & Benefits:
Long-life, Non-Dispersive Infrared (NDIR) sensor
allows for precision low-level leak detection
Detection and measurement of CFC, HFC and
HCFC refrigerants, as well as CO2, N2O and SF6*
gases
Locates leaks in contaminated or high-ventilation
areas - immune to changes in temperature and
humidity
Cut leak inspection times by 50%
Instrument comes with battery pack, probe,
charger and soft case with shoulder strap
LCD screen displays real-time gas concentrations
with an audible tick-rate to pinpoint source of
leaks
Patent # 6,590,690

Locate leaks within display cases where
traditional leak detectors cannot
Applications include refrigerant gas detection,
trace gas analysis and medical monitoring

Accurate, Portable Low-Level Leak Detection
The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor
technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the
unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in
ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted
average (TWA) with a resolution down to 1 ppm.
The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good
“zero” baseline, enabling the monitor to be used in contaminated environments without affecting the
readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check
mode with "tick-rate" audible / visual alarms. The PGM-IR’s probe helps to locate leaks in small or hard to
reach places and provides up to 12 hours operation on a fully charged battery.
1-800-736-4666

|

724-334-5000

|

w w w. M y B a c h a r a c h . c o m

|

help@MyBacharach.com