CV500 pages

CV50 ELECTROCHEMICAL CELL
The CV50 Electrochemical Cell is a versatile small
cell made of DURAN heat resistant laboratory
glass equipped with a heating jacked and 4
(optionally 5) standard cone sleeves 13.5 mm for
insertion of most standardised electrodes, such as
reference electrodes, gold electrodes, platinum
electrodes and others. The cell can be operated
within a wide temperature range, depending on the
fluid used for heat transfer by the heating jacket.
The cell volume of nominally 50 ml will be suitable
for usual voltammetric experiments. The cell can
be used from 30 to 100 ml liquid volume, if smaller
volumes are required, a suitable beaker inside the
cell can be used. For use of electrodes which do
not have a glass sleeve 14.5 mm, but a cylindrical
shaft instead, different PTFE adapters are
available.
Figure left:
CV 50, consisiting of cell body (1), Teflon cell top
(2), heater connections (3a, 3b), platinised titanium
counter electrode (4), Haber - Luggin - capillary (5)
and 2 standard sleeve openings (7,8).
In this special version, the counter electrode is
situated in a separate compartment with glass frit,
and an injection opening, closed by cock (6) was
introduced.
CV50 ASSEMBLY KIT
Standard
Cell beaker 50 ml with heating jacket and Teflon top, with 4 sleeve openings 13.5 mm each
Options
Cover with 3 sleeves 13.5 mm, 2 sleeves 10 mm
PTFE cone adaptor 13.5 mm without bore
PTFE cone adaptor 13.5 mm with bore x.x mm (please specify)
Thermocouple protection tube with sleeve 10 mm, tube diameter 4 mm
Thermocouple protection tube with sleeve 13.5 mm, tube diameter 8 mm
Electrodes
Pt - electrode / Calomel reference electrode / AgCl reference electrode
Separate container for reference electrode / electrolyte bridge / Other electrodes on request
Stand
The cell comes with a rugged stainless steel / PVC - stand.