DX-1000 pages

DX-100

Video Processor for the FLX transformable LED

Features
• Digital effects
• Color correction and enhancement
• External genlock
• Advanced delay modes
• Internal test patterns
Inputs/Outputs
• Single/dual link DVI inputs
• EDID support
• SD-SDI/HD-SDI Input
• Genlock input
• Single-channel NNI output
Control
• DTS (v2.03 or later)
Mechanical
• Rack-mountable (5RU)
• Auto-ranging power supply

The DX-100 is a versatile video processor designed to control Barco’s FLX transformable LED series. Using Barco’s Director Toolset (DTS) application, the DX-100 provides
a powerful and creative tool for stage designers and directors.
The DX-100 accepts single-link or dual-link DVI inputs (RGB/YCbCr), through a DVI-I
connector, and SD-SDI or HD-SDI inputs (up to 1080i) via BNC. Internal signal processing is performed utilizing Barco’s proprietary Athena scaling technology with a
12-bit minimum color depth. An advanced motion-adaptive de-interlacer converts
interlaced or progressive segmented frame (PSF) inputs to progressive formats.
Color correction and enhancement is also provided for all video inputs.
Designed to drive Barco’s FLX-series LEDs, the DX-100 provides a single-channel
output in the NNI format through an HDMI connector. Using Barco’s Fiberlink NNI
transceiver link, the DX-100 can be connected to FLX LEDs up to 300 meters away.
In addition, to accommodate any production environment, three advanced delay
reduction modes are provided: standard, minimum and reduced.
The DX-100 supports a variety of digital video effects such as freeze, strobe, and
linear color transformations (e.g., monochrome and inverted video). The DX-100 can
also be genlocked to an external reference, to a selected input, or set to free-run.
Several internal test patterns are provided that can be selected and congured from
the DTS. Users can individually control each RGB primary, and set the test pattern
into diagonal motion.
All input, output and communication connectors are located on the unit’s rear
panel.