LPS 3K0 pages
3000W, Rugged Industrial Quality Variable Output Power Supply
LPS 3K Series
•
•
•
•
•
•
Power factor corrected input
Rugged industrial quality
Current and Voltmeters
Bench-top or 19” Rack mount
Custom output ranges available
Full electronic protection
This rugged, industrial quality, ac/dc power supply series with PFC input is specifically designed for applications that require wide output
adjustability. They are suitable for product testing and similar purposes in engineering labs or in the field. A variety of models are
available which can readily be adapted to customer requirements with lead times of only a few weeks. The units are built with fieldproven internal modules which are typically available from stock for the output ranges of 14-37V (24V), 28-74V (48V) or 60-160V
(125V). The output voltage adjustment potentiometer knob is located on front panel of the unit. Electronic adjustment by analog
control voltage (0 – 10V or similar) is also available. Other output voltages and adjustment ranges are available on request. Output
voltage and current are displayed on analog meters on the front panel of the unit. Heavy-duty terminals for the output are also located
on the front-panel. The AC-input is equipped with a breaker, which is also used as an ON/OFF switch. Cooling is by high quality internal
fans, which provide sufficient airflow for operation at the specified temperature range without de-rating. The units are available in
bench-top and 19” rack-mount format. Full electronic protection, low component count, large design headroom and the use of
components with established reliability result in a high MTBF. The unit is manufactured at our plant under strict quality control.
SPECIFICATIONS
Input Voltage
95V - 264V universal
Max input current: 40A max.
Power Factor is better than 0.97 at
full load for the entire input range.
Meets EN61000-3-2 and
EN61000-3-12
Consult factory for other inputs
Input Protection
Inrush current limiting
Internal safety fuse
Input breaker 50A, used also
as ON/OFF switch
Lower voltage than the specified
minimum input will not damage
the unit
Isolation
2250Vdc input to chassis
4300Vdc input to output
8mm spacing
1000Vdc input to output
Standards
Designed to meet EN 60950 and
corresponding UL and CSA standards
EMI
EN 55022 Class A with margins
Switching Frequency
Input section: 100kHz ± 10kHz
Output section: 55kHz ± 3kHz
Output Voltage
24V (14-37V adj. range) 80A max or
48V (28-74V adj. range) 40A max or
125V (60-160V adj. range) 18A max.
Output adjustable by knob on
front panel, or electrical control
with analog control voltage
Output is floating either terminal
can be grounded or several units can
connected in series for higher voltage
Consult factory for other output
requirements
Redundancy Diode
None
Line/Load Regulation
±1% combined from no load to
full load
Dynamic Response
Max 5% voltage deviation for 10%
to 50% load step, with better than
1msec recovery time
Output Ripple/Noise
Better than 1% of output voltage
peak to peak or 0.2% RMS of the
output voltage (20HZ BW)
Output Overload Protection
Rectangular current limiting with
short-circuit protection.
Thermal shutdown in case of
insufficient cooling (self-resetting)
Output Overvoltage Protection
Second regulator loop
Efficiency
Output voltage dependent
Typically 80% at full load
Operating Temperature
0ºC to 50ºC for full specification
Extended temperature range
available
Temperature Drift
0.03% per oC over operating
temperature range
Cooling
By three high quality
built-in fans
Environmental Protection
Basic ruggedizing
Heavy ruggedizing and
conformal coating available as
option
Shock/Vibration
IEC 61373 Cat 1 A&B
Humidity
5-95% non-condensing
MTBF
85,000 hours @ 45°C
Demonstrated MTBF is
significantly higher
Indicators
Output ON LED (green)
Analog output voltage and
current meters on front panel
Control Input
Front-panel adjustments:
Potentiometer with knob
on the front panel or electronic
control by analog control voltage
Alarm Output
None
Dimensions (H x W x D)
3U (133 mm) x 381 x 305mm
3U (5.25”) x 15” x 12”
19” Rack mountable version
is also available
Weight
Approx. 10 kg (22 lb)
Connections
Input: Phoenix G10/2 terminals
on the rear panel
Output: Rugged terminal for
specific output combination on the
front-panel
RoHS Compliance
Fully compliant
Warranty
Two years subject to application
within good engineering practice
Please note that ABSOPULSE power supplies are designed and built to customer specifications. The specifications on this data sheet are generic and
will vary depending on input/output configuration and other customer requirements. Generic specifications are subject to change.
Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems
and DC-input fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility
ABSOPULSE ELECTRONICS LTD
110 Walgreen Road, Ottawa. Ontario. K0A 1L0. CANADA
Tel: +1-613-836-3511 | Fax: +1-613-836-7488
E-mail: absopulse@absopulse.com | http://www.absopulse.com
For further information, please see:
January 21, 2013/TS/CL
Power Systems – AC/DC – Laboratory http://www.absopulse.com/Absopulse_powersystems.php
Made in Canada
"