عضویت 
ورود اعضا
راهنمای خرید
Goggles anti fog and tightening procedure0 pages
TM
TM
Customer Information Aid
BioCleanTM Goggles Anti-fog
& Tightening Procedure
1. Acclimatization
The lenses of BioClean Clearview™ sterile,
single use goggles (BCGS1) are coated with
an anti-fog treatment to prevent fogging up
in use. However, moving the goggles from a
cold environment (for example a warehouse
or store room) into an environmentally
controlled cleanroom can cause fogging
due to the rapid change in humidity and
temperature.
If this phenomenon is experienced we
recommend that BioClean goggles are
moved into the cleanroom changing area
for a period of time before they are needed.
The goggles will then acclimatize to the new
conditions and be less liable to fog.
2. Fitting a facemask with goggles
When wearing goggles with a facemask, fogging
may occur as the result of warm, moist breath being
pushed up under the bottom rim of the goggles.
The wearer must ensure that the noseband of the
facemask is properly formed over the bridge of
the nose so that a good fit between mask and
face is achieved. The goggles should then be
donned and adjusted by pulling the strap ends
so there is a good fit around the face, and firm
pressure is applied to the top of the facemask,
assisting the seal between the mask and face.
Europe (Headquarters)tt
europe@bioclean.com
Americas ttttamericas@bioclean.com
Asia & Middle Eastttt
malaysia@bioclean.com
www.bioclean.com
"
