عضویت 
ورود اعضا
راهنمای خرید
PE Pipe Production Line0 pages
Offer Sheet
PE Pipe Production Line
Illustrative photograph:
Description
1.
BOCOMATIC extrusion machine – single screw extruder for the
Processing of PE, PP with possible co-extrusion
2.
Feeder
3.
Control panel
4.
Melt filter
5.
Tool
6.
Vacuum tank with a cooling calibration tool
7.
Belt outlet
8.
Cutter
Technical Data
Main electromotor: Input: from 7.5 to 160 kW; with revolution control using a
frequency
converter
Screw: from Ø 30 to Ø 120 mm; working length from 32 L/D
Screw and chamber version: Either nitride or bimetallic finish
Heating zone input: 4- 8 zones; total from 10 to 60 kW
Input of el. motors of the cooling fans in the heating zone: 0.3 kW / 1 zone; 4 - 8 zones;
total
from 0.5 to 5 kW
Input of the head heating zone: from 5 to 9 kW
a) basic
b) with mixer device - input 1.5 kW
Touch control panel shows and controls the line
Based on customer requirements; either panel or piston with either manual or hydraulic
shift
Based on customer requirements
Cradle
Reel
Line input
A 3.5 kW evacuation pump
Based on customer requirements, the cooling liquid pump may come with either an
exchanger or an air-conditioning unit
By either a bucket belt outlet or rollers
Input from 0.75 to 5 kW
Based on customer requirements – either with a saw or with rotating slicing with
bevelling
Tool for product discharge
Based on customer requirements – input from 1.5 to 3 kW
Total input approx. From 30 to 250 kW
Line price
Calculated based on specific line power and set selected
9.
Manufacturer reserves the right to change the versions, descriptions, and power data of individual devices given.
____________________________________________________________________________________________________________
Address: BOCO PARDUBICE machines, s.r.o., Čepí 1, CZ - 533 32 Pardubice
Tel. no.: +420 466 797 011 Fax: +420 466 797 012
E-mail: info@boco.cz
http: // www.boco.cz
"
