Wall-mounting inclinometer0 pages

BOVIAR srl

WALL-MOUNTING INCLINO

40 f.JLirf ^

GEOTECHNICS MONITORING OF STRUCTURES UNDER CON

STATIC STRUCTURAL MONITORING

WALL-MOUNTING INCLINOMETER Mod. BIAX

.1

Pag 1 di 1

DESCRIZIONE

The wall-mounted inclinometer "BIAX" is generally used in

long-term stability monitoring of buildings, monuments and

similar structures as far as rotation and tilt movements are

concerned. Most often this kind of monitoring projects allow

for a number of inclinometers and crackmeters, permanently

fixed to the walls, as well as some temperature sensor (to

evaluate possible influence of thermal excursion on readings),

all terminated in a multi-channel data logger (such as our set

of eDAS units), although they can be alternatively read with a

manual readout unit.

One (uniaxial version) or two (biaxial version) magnetoresistive

sensors, having a measuring range of ±10° and linearity of

±0.2°, are enclosed in a waterproof anodised aluminium box

(IP65), together with the electronics to condition the signal

outputs. The sensors are powered by the reading (or

recording) device and are available either with a

potentiometric or ±1 Volt voltage output. Each biaxial

inclinometer requires two channels of a data acquisition unit

and a 6 - or 8 - core cable for connection. This version permits

to simultaneously monitor movements in two orthogonal

planes.

Inclinometers with capacitive sensors, smaller ranges and higher accuracy may be supplied on request.

* Specifications and standards subject to changes without prior notice.

BOVIAR

sistemi integrati per la diagnostica e il monitoraggio

REV. 28/09/11

Boviars.r.l. www.boviar.biz

Casoria +39 081.758.35.66 www.boviar.com

Lainate +39 02.93.79.92.40 infoSboviar.com