عضویت 
ورود اعضا
راهنمای خرید
Model F-20 Ultrasonic Slitter PW-530 pages
Model F-20 Slitter
PW-53
Ultrasonic Technologies
Ultrasonic Slitter
Model F-20
GENERAL DESCRIPTION: The Branson Model F-20 Ultrasonic Slitter is
designed for continuous slitting and
edge sealing thermoplastic films,
knitted, woven and nonwoven
materials such as nylon, polyester,
polypropylene, modified acrylics,
some vinyls, urethane, and synthetic blends. The ultrasonic slitting
process prevents unraveling of knitted or woven material by sealing
the slit edge with vibratory energy.
The Model F-20 operates with
2000bdc Series power supplies,
converter, booster, carbide-faced
horn, and a spring-on-air mounted
cutting anvil. The unit is readily
installed on materials handling
devices such as looms, winders and
unwinders or re-rolls, and can be
adapted for traverse slitting. A slitter capsule assembly is available
for custom installations when the
slitter is part of an automated
setup. The capsule assembly incorporates the air cylinder, springs,
anvil mount, and associated hardware. (Horn, booster, anvil, and
cooling requirements are determined by the application.)
KEY FEATURES:
• Slitting rates of 30 to 400 linear
feet (9 to 120 m) per minute,
depending on material and
desired results.
• Sealed edge is tapered with no
bead to add bulk to slit material.
• Spring-on-air anvil mounting
prolongs tool life; horn/anvil
contact points are renewable
through rotation.
• Integral cooling for converter
and horn.
• Power supply compatibility –
The Model F-20 Slitter is compatible with Branson Model 2000bdc
ultrasonic power supplies.
Note: the converter warranty covers a one-time
replacement within three years. These warranties
apply to equipment purchased in the United States.
