عضویت 
ورود اعضا
راهنمای خرید
C105 Chart Recorder - Pressure (Model C105AP C105BP C105AP C105AT)0 pages
Process Recorders
Clearscan C105 Chart Recorder
Model C105
Data sheet : ORP/2012
This range of temperature and pressure recorders can be built into
either of two types of tough steel case. Both have a lockable fronthinged door, permitting easy access to the chart and pens, and may be
either wall, panel or portable mounted.
The C105 temperature and pressure recorders have a tough circular
steel case which, is suitable for installing under severe industrial conditions. The door has a strong polycarbonate window.
Pens
The recorders utilise sealed ink capsules with built-in fibre-tipped pens
which are replaced simply and without mess. Single pen recorders and
the first pen of two pen recorders trace in red ink; the second pen of
two pen recorders traces in green ink.
Charts and chart drives
The standard chart durations are one revolution every 12 hours, 24
hours or 7 days, the chart drive being either an electrical or a mechanical (clockwork) motor. Alternatively a 24 hour or a 7 day electrical
chart drive with its own built-in, recharging reserve power unit, can be
selected. This version gives a continuing trace through a mains failure.
When running “normally” in the fully charged condition the power unit
accumulator holds enough capacity to drive continuously for five days.
Standard Pressure Ranges
Standard Temperature Ranges
Standard Range
Sensing Element
Material
Range
Range
0.2 to 1 bar
0 to 1 bar
0 to 1.6 bar
Single Capsule
Beryllium Copper
or
Stainless steel
-40 to +40 Deg C
0 to 160 Deg C
-30 to +30 Deg C
0 to 200 Deg C
0 to 4 bar
0 to 6 bar
0 to 10 bar
0 to 16 bar
0 to 25 bar
0 to 40 bar
Capsule
Bellows
50 to 150 Deg C
50 to 250 Deg C
100 to 400 Deg C
100 to 500 Deg C
Phosphor Bronze or
Stainless Steel
-1 to 0 bar
0 to 50 Deg C
Stainless Steel
-1 to +1.5 bar
-1 to +3 bar
-1 to +5 bar
-1 to +9 bar
20 to 120 Deg C
0 to 120 Deg C
Bourdon Tube
0 to 40 Deg C
0 to 100 Deg C
0 to 60 bar
0 to 80 bar
0 to 100 bar
0 to 160 bar
0 to 250 bar
0 to 300 bar
0 to 400 bar
0 to 600 bar
0 to 1000 bar
0 to 1200 bar
0 to 1600 bar
0 to 400 Deg C
0 to 60 Deg C
Phosphor Bronze or
Stainless Steel
0 to 300 Deg C
-25 to +25 Deg C
Bourdon Tube
-30 to +50 Deg C
Beryllium Copper
Calibration in other units of pressure and temperature as well as non-standard ranges are
available on request
Other pressure ranges are available on request
Excellence the World can Measure
TM
"
