BT603-LAN Cable / Wire Tester0 pages
BT603 ver1.0/SEP.10
BT603
Cable Dr.™ - All-in-One LAN Network Verifier with
TDR/TDX Length Measurement and Network
Performance Test
Cable Dr.™ (Model No.: BT603) is the all-in-one and easy-to-use network
qualification unit measuring logical network performance and physical condition of
network cables. It allows network engineers to install and maintain efficiently Local
Area Networks (LAN) with 10BASE-T and 100BASE-TX based on the Ethernet
protocol.
Precision TDR LAN
Cable Length
126*64 Dot Graphical
Measurement &
display, easy to
Fault Locate
operate menu
(Graphic, Numeric
TDR / Graphic TDX)
Graphical Wire
Mapping, Up to 4
Remote ID
Crosstalk Test
(Signal Performance)
Logical Network
Performance Test
(round-trip time [RTT],
IP scanning, Link
Partner)
1kHz Tone
Generation
LAN: 10BASE-T or
100BASE-TX
Coaxial: Cable TV,
HFC networks &
Telephony cables
Serial Communication
Port (USB, RS232),
Windows Software
For measuring logical network performance, it provides the round-trip time (RTT)
testing to measure network speed under dynamic and static configuration protocol
and the IP scanning to show the information on all the terminals connected to a local
network. It can also evaluate the capability of link partners such as supported
network speed (10BASE-T or 100BASE-TX) and duplexity (half- or full-duplex).
The device provides the physical information of the LAN cable under test such as
cable length, faulty positions (open or short) and wire map (open, short, split, crossed
and reversed). In particular, with the novel high-resolution graphic TDR (TimeDomain Reflectometer) and TDX (Time-Domain Crosstalk), it is possible for users to
locate faulty positions along the cable up to 1km. These TDR and TDX can also be
Due to our policy of continual product development we reserve the right to amend the specifications of all mentioned products without notice.
Created on 10/19/2012
Prepared by KIT
Page 1 of 6
"