D2 - PHD 1-20 Sténopé / Kit Détecteur de vacances de base0 pages
DATA SHEET D2
PHD 1-20 PINHOLE /
HOLIDAY DETECTOR
Buckleys Pinhole / Holiday Detectors enable
inspectors to check quickly and effectively for
porosity, pinholes and other faults in a wide range
of non-conductive coatings and linings.
The PHD 1-20 is suitable for checking coating
thicknesses of 20 microns to 6.5mm and is
extensively used in the petro-chemical, aerospace,
pipeline construction and plastic fabrication
industries.
If additional electrodes and accessories are
required, the PHD 1-20 can be supplied as a
Complete Kit (see data sheet D2A). Specific kits are
available for testing pipeline coatings (see data
sheet D23) and for checking porosity in roofing and
bridge deck membranes (see data sheet D24).
FEATURES
Clear 3½ digit LCD display of test voltage
Audible and visual alarm fault indicators
Calibration Certificate to National Standards
supplied
Power limited output for operator safety
Safety Switch incorporated in handle
Built-in Charger Unit
Lightweight and portable
Variable sensitivity for testing on concrete
substrates or moist surfaces
Full range of electrodes available
One year “back-to-base” warranty
CE approved
BASIC KIT (ref: D2) comprises:
PHD 1-20 unit with built-in charger and battery,
shoulder bag, test probe handle with 2m high voltage
lead, mains charger lead, earth lead (5m), steel drum
brush, trimming tool and test voltage calculator. A
calibration certificate is included in the comprehensive
instruction manual.
TECHNICAL SPECIFICATION
Adjustable Output voltage range: 1-20kV DC
Variable sensitivity: 0-500uA
Suitable for coating thicknesses 20 microns to
6.5mm
Maximum continuous current: <1mA
Operating time: 10 hours average
Meter accuracy: +/- 1%
Mains voltage for charging: 90 to 240V AC
50/60 Hz
Weight (unit only): 6.5Kg
Dimensions (unit only): 21cm wide x 12.5cm high x
26.5cm deep
Packed Weight: 8Kg
Dimensions (packed): 36cm x 36cm x 36cm
Note: Due to ongoing technical developments, all stated information is
typical and is subject to change without notice or obligation
AFTER SALES SERVICE / TECHNICAL SUPPORT
All Buckleys products are manufactured under the controls established by a quality management system that meets the
requirements of BS EN ISO 9001:2008 and are supplied with a one year “back-to-base” warranty.
The equipment is proven to be robust and reliable and will give years of service if maintained in accordance with our
instructions.
Annual re-calibration is recommended for the PHD Pinhole/Holiday Detectors. Buckleys provide full repair and calibration
facilities offering a fast turn-around service for customer’s equipment.
Advice on specific applications for all Buckleys products is available from our technical department. Contact us by telephoning,
sending a fax or by e-mail using the contact details below.
Buckleys (UVRAL) Ltd., Buckleys House, Unit G, Concept Court, Shearway Business Park, Shearway Road,
Folkestone, Kent. CT19 4RG. UK
Tel: +44 (0)1303 278888 Fax: +44 (0)1303 274331
e-mail: sales@buckleys.co.uk web site: www.buckleys.co.uk
0812