V1OOP0 pages

Model: V100P
VALVE ACCESSORIES & CONTROLS
PNEUMATIC VALVE POSITIONER

A line of pneumatic valve positioners incorporating over
sixty years of design, manufacturing and marketing
expertise, creating one of the most durable, reliable
instruments on the market.
This positioner can be ordered as a base pneumatic model
but can be converted to a standard electropneumatic, IS, Ex
or Fail Freeze model in a matter of minutes, without
removing the unit from its installation.
Accessories in the way of gauges, feedback modules or
a raised indicator can be added in a matter of minutes.
Maximum modularity equals maximum flexibility and with a
simple design and quality components, the performance
is a maximum as well.

Input Signal
20-100KPa (3-15PSI)

Thread sizes
Air connections

Supply Pressure
<1MPa (<145 PSI)

Electrical entry
Gauge ports

Linearity Error
<0.7% FS

1/4"G
Optional 1/4"NPT
M20
Optional 1/2"NPT or PG13.5
1/8"G
Optional 1/8"NPT

Ingress Protection
IP66 (NEMA 4X)

Hysteresis
<0.4% FS

Surface Finish
Powder Polyester

Repeatability
<0.3% FS

Weight
1.6Kg (3.5lbs)

Pressure Gain
@ 600KPa (87PSI) according to ISA S75.13
750 Pout/Pin
49% Pout/%Pin
Air Capacity
@ 200KPa (29PSI)
@ 600KPa (87PSI)
@ 1MPA (145PSI)

270SLM
800SLM
1350SLM

Bleed Rate
@ 200KPa (29PSI)
@ 600KPa (87PSI)
@ 1MPA (145PSI)

5SLM
15SLM
25SLM

9.5SCFM
28.3SCFM
47.1SCFM

Options
Various Spindles for different actuators
Various cams
Gauges
Feedback modules
Indicators

Temperature Range
-40 to +85 Celsius (-40 to +185 Fahrenheit)

Pilot Valves
W1 Low Gain Pilot Valve, pressure gain 300 @ 600KPa
Bleeds 33% less, air delivery 10% less than W3
W2 High Gain Pilot Valve, pressure gain >1000 @ 600KPa
Bleeds 33% more, air delivery equal to W3
W3 Standard Pilot Valve, Air capacity and Bleed as left
W1 for better stability, W2 for better response & accuracy

Benefits
Simple calibration. With the non-interactive zero and span
adjustment and the external zero adjustment, calibration
is simple and time saving.
Flexibility. One housing for pneumatic or electro-pneumatic.
The I/P can be installed or removed at any time. Multiple
mounting capability. Standard indicator allows for air to
open or air to close operation. Flat or raised indicator
available. F05 standard housing with changeable drives.

Benefits
Maintenance friendly. The pilot valve assembly can be
cleaned by removing one screw and can only be installed
one way - the correct way. The gauge block is standard.
I/P test point positioner loop testing.
Durable. Cast aluminium, polyester coated housing.
Stainless steel retained fasteners. Double locked stainless
steel cam. Quality internal parts. Unique electrical compartment
fitted with an o-ring is pressure sealed by the cover.

Rev-04 August 2009

0.18SCFM
0.53SCFM
0.88SCFM

Datasheet VAC-001