766GP Supasafe0 pages
SI Budenberg
nnnnAn impressive technical specification and wide range of
nnnnstandard features make the SUPASAFE the obvious choice
nnnnfor a wide range of process and engineering applications.
nnnnPrimarily designed for the harshest of offshore Oil & Gas
nnnnenvironments. SUPASAFE provides a very cost effective
nnnnsolution to the process industry and therefore is the ideal
nnnn'standard' choice for companies looking to benefit from a
nnnnstock and range rationalisation.
nnnnMeeting all the current National and International specifications
nnnnand regulatory standards including EN 837, PED etc.
nnnnSUPASAFE with its inherently safety pattern construction
nnnnincorporates many features as standard that are designed to
nnnnprovide full protection to the instrument and the operator.
nnnn100 mm (4") & 150mm (6")
nnnnDirect, Surface and Flush
nnnnRugged one-piece full Safety Pattern case to S3 standard
nnnnwith a solid baffle partition wall and full blow out back
nnnnmanufactured in 1.6mm thick, 316L stainless steel.
nnnn0 to 600 mbar to 0 to 1400 bar Pressure
nnnnEquivalent units of pressure / vacuum available
nnnnSingle and dual scales are available
nnnn<80 Bar - 316L Stainless Steel Bourdon Tube
nnnn>81 Bar - 316L Stainless Steel Coil
nnnnUnits withstands overload pressure up to 130% of FSD
nnnnOverload & vacuum stops are fitted on the movement
nnnnOption: Mechanical overload clamps fitted internally to
nnnnenable units to withstand up to 3x the max scale reading
nnnn3/8", 1/2" BSP
nnnn1/2" NPT
nnnnOther connections available, contact our Sales Dept for details
nnnnCL:1 1.0% of FSD as defined in EN837-1
nnnnOption: 0.5% of FSD as defined in EN837-1
nnnnOperating: -20 to +90 °C
nnnnStorage: -40 up to +100 °C
nnnnOptions: for lower or higher operating temperatures, please
nnnncontact our Sales Office
nnnnWhite Anodised Aluminium marked in black finish
nnnnSingle or dual scale
nnnnStainless steel coloured black
nnnnOptions: Micrometer Adjustable
nnnnStainless Steel Construction
nnnnOption : Viscous Damped movement to overcome the effects
nnnnof minor pressure pulsations
nnnn3mm Laminated Safety Glass (Standard)
nnnnOption: Acrylic Plastic Window
nnnnIP67 as defined in EN 60 529
nnnnAll instruments are individually calibrated and have an unique
nnnnSerial Number printed on the dial. A Certificate of Conformity
nnnnTraceable to National Standards is Supplied Free of Charge
nnnnBS EN 10204 3.1 B Material Certification
nnnnPoint by Point Test Certificate
nnnnAll units are manufactured to comply with EN 837-1, S3
nnnnspecification and other regulatory standards including PED.
nnnnReferto EN 837-2
nnnnVariation in indication caused by temperature shall not exceed
nnnn± 0.04 X (t2 -11)% of the span where:
nnnnt1 is the reference ambient temperature in degrees Celsius
nnnnt2 is the ambient temperature in degrees Celsius
nnnnRev-03 October 2007
nnnnDesigned and Manufactured in UK.
nnnnDatasheet BUD-020
"