15L Low Pressure Direct Mounting0 pages

Model: 15L
SMALL DIAL - LOW PRESSURE
INDUSTRIAL SERVICE GAUGE
The model 15L is manufactured to meet the demand for small
high quality gauges designed for applications using gases,
water or any liquid that does not attack brass and bronze.
The one piece polycarbonate case with integral window forms a
solid baffle in front of the Bourdon tube and incorporates a full
diameter stainless steel blow-out back so that in the event of a
tube failure through corrosion, explosion or gross over pressure
any vapour or debris is vented from the back of the case.
This gauge is designed for direct mounting on to the process
pipe work and comes with a grey inner sleeve to give a grey
colour to the side of the case.
Size
63 mm & 80mm Dial diameter
Dial
White Anodised Aluminium marked in black finish
Option: Dual scale, colour bands & sectors
Customisation with Company Name & Logo also available
Mounting
Direct
Case & Bezel
One Piece Polycarbonate, Safety Pattern case
Scale Ranges
0 to 25 mBar, up to 600 mBar Pressure
Equivalent units of pressure / vacuum available
Including inches and mm of Water or Mercury
Single and dual scales are available
Pressure Element
Beryllium Copper Capsule, which gives the energy and precision
required for accurate repeatable low pressure measurement
Overload
Units will withstand up to 130% of FSD
Pressure Connection
1/4” BSP as Standard
1/8", 1/4” & 3/8" BSP & NPT are also available
Accuracy Class
CL:1 1.0% of FSD as defined in EN837-1
Temperature
Operating: -20 to +90 ºC
Storage: -40 up to +100 ºC
Options: for lower or higher operating temperatures, please
contact our Sales Office
Pointer
Stainless steel coloured black
Movement
Brass Construction
Option : Viscous Damped movement to overcome the effects
of minor pressure pulsations and vibrations
Window
One Piece Polycarbonate
Environmental Rating
IP54 as defined in EN 60 529
Traceability
All instruments are individually calibrated and have an unique
Serial Number printed on the dial. A Certificate of Conformity
Traceable to National Standards is Supplied Free of Charge
Certification available
BS EN 10204 3.1B Material Certification
Point by Point Test Certificate
Safety
All units are manufactured to comply with EN 837-1, S3
specification and other regulatory standards including PED.
Installation instructions
Refer to EN 837-2
Temperature Effect
Variation in indication caused by temperature shall not exceed
± 0.04 x (t2 – t1)% of the span where:
t1 is the reference ambient temperature in degrees Celsius
t2 is the ambient temperature in degrees Celsius
Rev-05 January 2010
Designed and Manufactured in UK.
Datasheet BUD-001