High Pressure Pump
Series HDP 800
Design criteria
Hammelmann high pressure pumps
are built to operate at the continuous
maximum duty stated in the
performance parameters. Just
compare the crankshaft speed,
average plunger speed, plunger
diameter and power rating.
High pressure pump
Weight: approx. 3700 kg

Features
Power ratings up to 800 kW
Vertical 5 cylinder design
Wide variety of complementary
ancillaries

Quality and reliability
Stainless steel pump head free of
alternating stress
Cross head piston bellows seal
Choice of 'application specific' seal
assemblies

Stationary unit
with diesel engine
Length:
Width:
Height:
Weight:

Solid ceramic or tungsten carbide
plungers

3970 mm
2100 mm
2225 mm
approx. 9200 kg
at 839 kW and
without full fuel tank

Choice of bronze or stainless steel
suction chamber
Crank section calculation by
‘Finite element method’ ensures
long working life under continuous
load

Main dimensions without accessories
such as suction line, pressure regulator
etc. All shown as right side drive.
Detailed dimensional drawings and
weights available on request.

Twin helical integral reduction gear
with crankshaft supported
by 4 bearings
Pressurised oil lubrication
system with oil cooler/filter

Hammelmann
Maschinenfabrik GmbH
Zum Sundern 13-21
D-59302 Oelde • Germany
Telefon (0 25 22) 76-0
Telefax (0 25 22) 76-444
eMail: mail@hammelmann.de
Internet: www.hammelmann.de

08/13 © Copyright Hammelmann Maschinenfabrik GmbH,
Oelde, Germany. Subject to modification.