BINCEN Upright U Beam Type Truck Scale Weighbridge0 pages
BINCEN·WEIGHING
Upright U-shaped frame box Beam structure VS.
Simple Inverted trapezoidal U-shaped Beam.
BINCEN manufacturing license number:00000868.We adopt upright U-shaped beam and to guarantee
equal force, rigidity, torsional compression, impact resistance, and long service life.
Patent number: ZL 2009 2 0126938.2, ZL 2009 3 0160561.8. Load cell using domestic brand-name
(Keli,Zemic),accurate,stable and reliable. KELI is the largest sensor companies; ZEMIC is Aerospace
military enterprises, this company introduced the United States Revere technology and production
lines,a large number of export and OEM.
1.Our Sealed Frame Box structure’s scale body, the main features:
1) Upright U-shaped girder, the longitudinal beams with steel plate thickness 8mm, Girder height use
250,280,300,320mm according to weighing capacity and special request ,Also,requires the selection
of the middle two H-beam,which will be higher strength and better performance.
Of course, the whole H-Shaped longitudinal beam is the best performance and longer life. Our
U-shaped upright beam, girders and ends with double-sided welding,so that form strong impact while
heavy vehicle brakes,our welding beam ends will not tear easily.
2) Inside the longitudinal direction of the scale body, addingδ6mm thick transverse ribs every 500mm,
the middle scale body also has δ6mm high lateral full bars,like this way,transverse ribs and integrated
lateral full bars will make each longitudinal beam bear force equally,in particular in the Middle scale
body happens maximum deflection, so our design of lateral full bar with six beams forced,Reduce the
scale body partial distortion,deformation,Thus,extending the life of the scale body.
3) Four-lane bottom sealed with steel plate which form a strong box shape, the bottom of scale body
tensile strength enhanced,better rigidity,greatly strengthen Girder bending capability.
2.Inclined U-shaped beamInverted trapezoidal U-shaped Beam
Main Disadvantage
With 4 ~ 6mm wall thickness steel plate girder only,scale body no internal lateral ribs,no bottom
seal,only panel and six Inverted trapezoidal beams forms scale body, diagonal lift is soft,anti-bias load
is weak,no torsion,nor impact.Because of Inverted trapezoidal beam single side welding,Steel girder
plate is not upright,subject to Slam the brakes on frequent overloading,And the girders by vertical
force and the horizontal component,the horizontal component onto the inclined welding to tear easily;
if exist partial defect, beams will be quickly tear off the welding joint, resulting in beam fracture,
truck crush.Through market research,This accounts for the failure rate reached as high as 20%.