RD53, pulse divider0 pages
C-mac
®
Pulse divider/preselection relay RD53
Preselection relay / pulse divider
Digital adjustment between 2 and 999
Pulse inputs for contact, NAMUR or NPN transistor.
Transistor output for connection to “slave module”
1-pole relay output
DC supply or AC supplies up to 230 VAC
Made in accordance with the
and EMC regulations
C-mac® module type RD53 is a digital pulse counter module, selectable as pulse divider or preselection relay.
The pulse inputs can be activated from a mechanical contact, a transistor or a NAMUR sensor, and the reset input
can be activated from a mechanical contact or a transistor.
The unit is supplied with a “slave” transistor output, in
this way several units can be connected to the same pulse
sensor.
8 A - 250 VAC, ohmic load
EMC og safety regulations.
Emmision:
EN 50 081 - 1
Immunity:
EN 50 082 - 2
Safety:
EN 60 730
Approvals: The units are produced in accordance with the
CE og low voltage regulations.
Functional diagram: (selector switch set on 3)
Common technical data:
24, 115 and 230 VAC +/- 10%
40-70 Hz
12-50 VDC or 48-250 VDC
Supply - internal - output: 3.75 kV
24 VDC +/- 10%
Note: With this DC supply there is
no galvanic isolation between the
supply and internal electronics.
Power consumption: 2,5 VA
Operating temp.:
-20°C to +60°C
Humidity:
0 - 90% RH, non-condensing
Counter inputs:
pins 5-6-7
NAMUR input:
pins 6-7, pin 6 positive, pin 5 and 7
connected together.
Contact/transistor: pins 5 and 7, pin 5 positive.
Reset input:
pins 7-8, pin 8 positive.
Counter output:
pins 7-11, pin 11 positive.
If the same sensor is used for several
units, pin 7 on all units are connected
together, pin 11 on the first unit is
connected to pin 5 on the next, etc.
Minimum pulse time: minimum pulse- and pause time
is 15 msec.
Indications:
Green LED:
Supply voltage connected
Red LED:
Relay active
Adjustments:
3-digit digital switch
Selection of function: pins 7-9.
pins 7-9 open:
Preselection relay
pins 7-9 connected: Pulse dividing relay.
Supply voltage, AC:
Supply frequency:
Variable supply:
Isolation voltage:
Supply, DC:
Max. load, relay:
supply
pulse inp.
reset
relay, ex.1
relay, ex.2
Ex.1: Preselection relay, pins 7-9 open
Ex.2: Pulse dividing relay, pins 7-9 connected
Connections:
+
6
5
7
4
8
3
9
2
+
1
11
10
Supply
Ordering guide:
RD53-1-x-yyy
x-yyy = supply voltage:
0-024:
24 VDC
4-012:
12-50 VDC
4-048:
48-250 VDC
1-024:
24 VAC
1-115:
115 VAC
1-230:
230 VAC
Ordering example: RD53-1-1-024
Comadan
Produktion a/s
8-5
"