DrumQuik® PUR0 pages
DrumQuik PUR
®
Dispensing System for Professional,
High Purity Chemical Management
DrumQuik® PUR is an easy-to-use product for extracting high purity chemicals from rigid
containers (jerry cans, drums and IBCs) using common pumps within a closed-system design.
The integrated flare outlet fitting allows easy connections to chemically resistant tubing
such as PFA or FEP. The system minimizes chemical exposure and promotes employee and
environmental safety. DrumQuik PUR is ideally suited to cost-sensitive one-way/single-use
applications and can be disposed of, recycled along with the container or reused with a new
container. DrumQuik PUR products are manufactured in a cleanroom and double bagged to
maintain purity until ready for use.
FeaturestBenefits
Quick connect/disconnectt
Allows faster container change-outs
All plastic constructiont
No metallic corrosion/contamination
Automatic shutoff valvet
Stops flow when disconnected
Cleanroom manufacturedt
Assures high level of purity
Applications:
•A
cids, caustics and
solvent delivery
Disposable drum insertt
Minimizes chemical exposure & contamination
• harmaceutical chemical
P
handling
Specifications
• emiconductor wet
S
process
Pressure:
Uncoupled: Vacuum to 45 psig (3.1 bar)
Coupled: Vacuum to 22 psig (1.5 bar)
• lat panel production
F
Temperature:
Drum insert: -20° to 120°F (-29° to 49°C)
Coupler: 0° to 120°F (-18° to 49°C)
• hotovoltaic cell
P
manufacturing
Materials:
NOTE: The torque specifications listed above are general recommendations
which may need to be adjusted + or – depending on specific application.
• aboratory chemical
L
handling
DrumQuik® PUR
Flow Performance
Pressure Drop (psid)
Drum insert & dip-tube:
Virgin polyethylene (HDPE)
Shipping plug:
Virgin polyethylene (HDPE)
Coupler: Virgin PVDF
Spring (coupler only):
Virgin PEEK UHP (PPS or Teflon® encapsulated
316 stainless steel optional)
Seals:
Coupler seals: FKM (Simriz® UHP FFKM
Perfluoroelastomer optional)
Bung seal: Polyolefin (POE) (EPDM or FKM
optional)
Shipping plug seal: EPDM (FKM optional)
Torque specifications:
2" Buttress – 20ft-lbs (27 N-m)
Shipping plug – hand tight
20
18
16
0.0 8
15
23 30 38
45 53 61 68 76 (lpm)
14
124.1
110.3
96.5
12
82.7
10
8
6
4
2
68.9
Cv~3.6
Kv~51.7
0
2
4
6
8
10
55.2
41.4
27.6
13.8 (kPa)
12 14 16 18 20
Flow Rate (gpm)
Note: As tested with water.
"