عضویت 
ورود اعضا
راهنمای خرید
ICESL Series - Internal Count/Verfify Premium Brushless Series0 pages
Phone: 772-465-4302
Toll Free: 888-500-2755
ICESL DRIVER WITH INTERNAL COUNTER
ICESL BRUSHLESS DRIVER with INTERNAL COUNTER
32V / 40VDC Brushless Motor
The Delta Regis ICESL Series tool integrates the performance of a DC Shut-Off Clutch Brushless
Screwdriver with a programmable, handle-mounted Batch Counter. Each tool includes a 2m cable
to connect to a 32V or 40VDC Power Supply (sold separately).
•t
Batch count value can be set from 0-99 screws/batch. Screwdriver will count down
by one each time a good fastener rundown is completed.
•t
LED display shows current screw count value and displays the available options
and setting values during programming mode.
•t
Programming buttons are located on the driver directly below the LED display.
Buttons are used to set-up parameters prior to using the screwdriver for assembly.
Programming mode can be locked by pressing a preset combination of buttons to
avoid accidental program changes.
•t
‘Clear’ button allows the count to be manually reset to begin a new batch.
•t
Min and max rundown time settings allow the user to establish an acceptable time
window for fastener installation. Only fastener rundowns which occur within the
specified window will be accepted as good (OK) and cause the count to increment.
Rundowns completed outside the time window will be considered no good (NG).
This might occur if the screw was cross-threaded (time too short - below min time)
or stripped (time too long - greater than max time).
•t
Visual and audible indicators are available to let the operator know if the rundown
was OK or NG, and when the batch has been completed.
•t
Screwdrivers can be hard-wired with additional output signal cable (included in
box) to output rundown status (NG/OK Batch) to a PLC.
ICESL6 Drivers with Internal Counter
Start Type
Range In.Lbs
Range Nm
Speed (RPM)
Hi / Lo
ICESL623-ESD
Lever
1.3 - 10.5
0.15 - 1.18
1000 / 700
ICESL623P-ESD
Push
1.7 - 10.5
0.20 - 1.18
1000 / 700
ICESL623F-ESD
Lever
1.3 - 10.5
0.15 - 1.18
2000
ICESL623PF-ESD
Push
1.7 - 10.5
0.20 - 1.18
2000
ICESL624-ESD
Lever
2.6 - 16.5
0.29 - 1.86
1000 / 700
ICESL624P-ESD
Push
2.6 - 16.5
0.29 - 1.86
1000 / 700
ICESL628-ESD
Lever
8.7 - 26.0
0.98 - 2.94
1000 / 750
ICESL628P-ESD
Push
8.7 - 26.0
0.98 - 2.94
1000 / 750
ICESL628F-ESD
Lever
8.7 - 26.0
0.98 - 2.94
2000
ICESL628PF-ESD
Push
8.7 - 26.0
0.98 - 2.94
2000
ICESL629-ESD
Lever
17.4 - 43.4
1.96 - 4.90
1000 / 750
ICESL629P-ESD
Push
17.4 - 43.4
1.96 - 4.90
1000 / 750
Model Number
www.deltaregis.com
Length
in / mm
10.6 / 270
Grip Dia.
in / mm
1.5 / 37
Weight
lbs / g
1.3 / 580
Use with Power
Supply model
BECT620C
or
BECT620IC
(‘F’ fast tools)
(see pg 9)
11.6 / 294
1.6 / 40
1.8 / 820
BECT640HL
(see pg 14)
Page 15
"
