Scalers0 pages

Pneumatic: ideal for chipping and removing metal, stone,
concrete and brick, as well as carving wood
• Use in oilfields, fabrication shops, petrochemical
plants, construction sites and foundries
• Chisel scalers are general-purpose hammers
for chipping stone, metal, concrete, brick and
Model CSU-182LCS
for carving wood
Scaling Hammer with Lever Throttle
• Needle scalers are ideal for removing weld
Gooseneck handle and push throttle hammers also available.
splatter, rust, paint and other debris from
many surfaces and hard-to-reach places
Non-sparking Needles – CuBe
Copper Beryllium non-sparking
needles available for CSU-182LNS
and CSU-1BLNS.
Model CSU-182LNS
Needle Scaler with Lever Throttle
Ex308-319B - 7" long needle, 19 per pack
Ex308-3100B - 7" long needle, 100 per pack
Push throttle hammers also available.
Non-sparking CuBe needles (Ex308-319B) available.
Model CSU-1BLNS
Needle Scaler with Lever Throttle
Model CSU-1BLCS
Chisel Scaler with Lever Throttle
Non-sparking CuBe needles (Ex308-319B) available.
Accessories available:
CSU-43: 7" Steel Needles
EX308-319B: 7" CuBe Needles
CSU-047: 3/4" Flat Chisel
CSU-048: 1-3/8" Angle Chisel
Ask About Non-sparking CuBe Chisels.
Model No. Bore
Stroke
Rec'd
Blows per
Minute Hose Size Length
Weight
(lbs.)
Scaling Hammer - Lever Throttle (takes 1/2" ir notched shank chisels)
CSU-182LCS 15/16" 1-1/16"
4000
1/4"
9"
4
Needle Scaler - Lever Throttle (requires 19 needles; takes 1/2" ir notched shank chisels)
CSU-182LNS 15/16" 1-1/16"
4000
1/4"
17"
5.75
Chisel Scaler - Lever Throttle (takes 1/2" c notched shank chisels)
CSU-1BLCS
1"
4600
1/4"
10-1/4"
3.625
1-1/8"
Needle Scaler - Lever Throttle (requires 19 needles; takes 1/2" c notched shank chisels)
CSU-1BLNS
1"
4600
1/4"
17"
6.2
1-1/8"
•
1-800-700-5919
•
Air Inlet
Thread
CFM at
90 PSI
1/4"
13
1/4"
13
1/4"
6
1/4"
PNEUMATIC CHISEL SCALERS / NEEDLE SCALERS
Chisel Scalers / Needle Scalers
12
Visit our Web site at www.csunitec.com
63