EQ3730 EDIO Enhanced Discrete I/O Module 0 pages

-

SPECIFICATION DATA Eagle Quantum

Ι

Premier8 Channel Enhanced DiscreteInput/Output Module (EDIO)EQ3730EDIO

DESCRIPTION

The 8 Channel EDIO Module is specially designed toexpand the Input and Output capability of the Det-
Tronics Eagle Quantum Premier >
System.The unit is designed to provide continuous andautomated fire/gas protection, while ensuring system
operation through continuous supervision of System
Inputs/Outputs and Local Operating Network/Signalling
Line Circuit (LON/SLC) monitoring in the controller.The EDIO module provides eight channels ofconfigurable input or output points that can be
programmed for supervised or unsupervised operation.
Each input point can accept fire detection devices such
as heat, smoke, or unitized flame detectors. Each output
point can be configured for signaling or releasing output
operation. Each channel on the module is provided with
individual indicators for active and fault conditions. >

THEORY OF OPERATION

Each channel on the EDIO module can be configured
as an input to accept a connection from manual alarm
stations, heat sensors, smoke sensors, pressure
sensors, or as an output for notification or releasing.Both input and output circuits can be configured aseither a supervised or an unsupervised point. Each
input point is also assigned a circuit type, such as:
Alarm, Trouble, Supervisory, Gas High or Low Alarm, or
other. The EDIO module reports to the EQP Controller
and activates the appropriate static or user logic in the
EQP Controller.The EDIO module supports ANSI/NFPA Class A, Style 7communications with the Eagle Quantum Premier
Controller. IMPORTANT For Class A wiring, two input/output channels are
combined, thereby supporting up to four
input/output circuits.NOTEAn input must be active for at least 750
milliseconds in order to be recognized. The EDIO module can be mounted directly to a panel,
or it can be DIN rail mounted. System status can be
determined using the trouble-shooting procedures,
Eagle Quantum Safety System Software (S3) and thestatus indicators on the module. >
1.1 ٩ >
Detector Electronics Corporation 2005 2/0590-1189 size="-1">